Main functions and controls of BL Touch are same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board. BLTouch does not uses either optical, nor proximity(inductive/capacitive) sensor. BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It can be easily applied, since it has a small and simple structure. The BLTouch aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing. BLTouch uses existing RC Servo motor signal intactly, so just plug BLTouch on the same pins after removing servo motor.
Self-test: The push pin operate two times in a test when the power is on.
Alarm: The AI will flash the LED indicator if a problem is detected during a self-test or operation.
Wiring defect indicator : Blue and Red LED for indicating wiring defects.
- Latest BL TOUCH Sensor V3.1
Warning: Electronic devices can be damaged or destroyed if connected to the wrong side polarity. Check your polarity before plugging smart sensor in.
Note: An additional power supply may be needed if your board does not supply enough current at 5V. Depending on your type of 3D Printer, you may need to remove or add some parts to the controller board. Check with your printer manufacturer prior to purchase.
BLTouch is a type of semiconductor hall sensor and is an electronic component for 3D Printers. a precisely measures the tilt of the bed surface.
It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors.
It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating, and Z-probe(Zmin) Testing.
The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of an RC servo and microswitch. Thus, BLTouch can be applied on almost every board.
Self-test： The push pin operates two times in a test when the power is on.
Alarm：The LED light blinks if a problem was found on a self-test or during operation
Wiring defect indicator：Blue and Red LED for indicating wiring defects.
Easy to Use: This auto bed leveling sensor makes it easier to level the hotbed, which can precisely measure the tilt of the Bed surface. Bed leveling is not a problem anymore.
Intelligence self - check and alarm: The function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
Deliveries within Australia
For shipping price please use above estimate shipping for pricing. As shipping cost depends on your location, order size and desire courier service and provider. Order are dispatched within same or next business day for in-stock products. Courier Please rates are only calculated at checkout.
Aramex, Courier Please, AusPost Tracked Letter is excluded from same day dispatch, dispatch within 1-2 business day.
Our domestic shipping rates start at:
- from $8+ AusPost Standard Post (typically 2-10+ business days*, tracked)
- from $9+ AusPost Express Post (typically 1 to 5 business days*, tracked)
- from $8.5+ Aramex, Courier Please) (typically same-2 business day within SE QLD, 2-15 business days interstate, tracked) (We don't recommended this service for WA)
- from $30+ DHL Express (1-5 Business Day Metro Only) - Usually next day to metro business address on the east coast.
- from $35+ Uber Courier (same day delivery during business hours), fixed price table depending on distance from our warehouse. Max 20 KG,
Please use below as shipping time frame expectations. All order will be shipped by next business day.
AusPost Express Parcel
AusPost Standard Parcel
|Courier Please / Aramex
|6 - 20
Deliveries to NZ / World
All delivery to New Zealand / World is calculated based on selected service.
Please refer to AUSPOST Website for latest news and postage delivery time estimate to your area. https://auspost.com.au/service-updates/international-delivery-times
- Standard (Signature On Delivery & Extra Cover): 7-14 Business Days to Metro Area
- Express (Signature On Delivery & Extra Cover): 5-10 Business Days to Metro Area
- DHL: 1-6 Business Days (Contact us for quote) For select region DHL pricing is available at checkout for general spares.
Please note that shipping rates/total order are not inclusive of any local taxes, duties or import fees when the shipment passes through customs in the country of delivery. You may require to pay additional tax or custom duty, we cannot adjust order value.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.