Description
Pre-assembled Graphite Heatbed for Creality K2 Plus 3D printers
- No warping: bed stays super flat at 120C as well as at 60C. No need to heatsink the bed for long time like aluminum beds.
- Heats ~40% faster than the stock bed.
- Maximum bed temperature up to 130C compared to 105C stock bed.
- 1000W Heater has an inbuilt 150C self-recovery thermal switch for safety.
- Works with Eddy current sensors (Cartographer, Beacon, BTT Eddy).
What is Included:
- Pre-assembled Graphite Bed (with 1000W heater, magnet, grounding wire)
- Sanding Block
Shipping Note:
We ship items in a flat cardboard sandwich box to prevent warping during transit. This item cannot be combined with non-flat items for shipping, so please expect additional freight costs when bundling it with smaller parts or filament. If we can bundle smaller items within the same box, we will update the shipping total before processing your payment. Otherwise, feel free to contact support for a customised quote.
Documentation:
Community Mods:
- For alignment guide https://www.printables.com/model/1279370-k2-plus-extended-build-plate-guides-beta
General Note: You should never cut into AC heater pad.
Preparation:
Before applying either the magnetic sheet(for steel flex plate) or silicone heater to the bottom side we recommend to scuff surface with steel wool and wipe clean with isopropyl alcohol (IPA) before application. For Graphite, ensure the surface is completely dried before applying anything onto build plate such as AC Pad or Magnet.
More Info: https://www.youtube.com/watch?v=vZx4vfevwx4
More Info AC Pad Install/FAQ: https://support.dremc.com.au/en/support/solutions/articles/51000302252-keenovo-ac-heater-faq
Note
- To make sure the optimum performance for this heater is achievable, both temperature sensing and control elements should installed to controller.
Caution
- The Heater Mat is not suitable for stand-alone operation.
- Do not cut into the heater pad
- Ensure proper strain relief on wiring and proper grounding of the cast bed.
Warning
- These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Deliveries within Australia
For shipping prices, please use the above estimated shipping costs. Shipping costs depend on your location, order size, and desired courier service and provider. Orders are dispatched within the same or by next business day for in-stock products from local Brisbane Queensland warehouse depending on courier. Courier Please/Aramex rates are calculated only at checkout.
We highly suggest using AusPost Express for urgent deliveries or AusPost Standard for remote/rural areas. If you want us to manual quote freight for large complex order, please contact support for quote. As larger flat items and long product are shipped separately compared to general spares/filament to ensure those arrived safely. We suggest you pick a carrier and service you have good previous experience with for best delivery experience.
Aramex, CourierPlease, and AusPost Tracked Letter are excluded from same-day dispatch and will be dispatched within 1-3 business days. See our full policy and expectation: https://store.dremc.com.au/policies/shipping-policy
Our domestic shipping rates start at:
- from $9+ AusPost Standard Post (typically 2-10+ business days*, tracked)
- from $10 + AusPost Express Post (typically 1 to 4+ business days*, tracked)
- from $9+ Aramex, Courier Please) (typically 1-7+ business day* within Metro SE QLD/NSW/VIC/ACT, 3-12+ business days interstate, tracked) (We don't recommended this service for WA/TAS or urgent orders)
Pricing will depends on order size (weight/cubic size) and delivery location.
Please note that we do not offer any courier transit time guarantees or compensation if the item arrives later than expected. The provided ETA reflects the courier's estimated transit time after the item has been picked up. Please also account for an additional 1-3 business days for rural or remote areas or potentially delay with delivery network outside their controls such as localised weather events.
Please use below as shipping time frame expectations for metro area. All order will be ready to be pick up by courier by next business day or same day for some couriers, on rare occasional outside our control miss pickup by courier can occur, if that occurs item may be delay by 1-2 business day and we will make other arrangement to have item dispatch in a reasonable time frame.
https://auspost.com.au/service-updates/domestic-delivery-times
https://www.dhl.com/au-en/home/get-a-quote.html
https://www.aramex.com.au/media/2406/
|
Delivery Method |
QLD |
NSW/ACT |
SA/VIC |
NT/WA/TAS |
|
AusPost Express Parcel |
1-2 |
1-3 |
1-3 |
2-6 |
|
AusPost Standard Parcel |
1-3 |
1-5 |
3-7 |
3-10 |
|
DHL Express |
1-2 |
1-4 |
1-5 |
2-6 |
| Courier Please / Aramex | 1-7 | 2-7 | 3-7 | 10 - 15 |
Deliveries to New Zealand / World
All delivery to New Zealand / World is calculated based on selected service. Depending on situation, if we unable to send to country due to current world events, we may cancel your order. Please refer to below links for service updates/potential delays.
Please refer to AUSPOST Website for latest news and postage delivery time estimate to your area. https://auspost.com.au/service-updates/international-delivery-times
- Standard (Signature On Delivery & Extra Cover): 7-14+ Business Days to Metro Area
- Express (Signature On Delivery & Extra Cover): 5-10+ Business Days to Metro Area
- DHL: 1-5+ Business Days (Contact us for quote) For select region DHL pricing is available at checkout for general spares.
- Fedex/DHL are quoted at checkout, delivery time will depend on service and delivery location.
Please note that shipping rates/total order are not inclusive of any local taxes, duties or import fees when the shipment passes through customs in the country of delivery (unless specified at checkout). You may require to pay additional tax or custom duty, we cannot adjust order value.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
TDS / SDS :
Related Products
Please double check product compatibility