E3D High Flow ObXidian™ Hotend With Nozzle for Bambu Lab X1/P1 Series

• High Flow. There's no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That's where E3D High Flow technology comes in. Using our internal nozzle modification, we've managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
• Smooth and Hard. We've applied our E3DLC™ coating to the nozzle and heater parts, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
• No compromise. All of these new additions come in the same form factor as your stock Bambu; simply reuse your temperature sensor and heater pads, and it drops in place with no adjustment to the mount or part cooling required.
• Compatibility. The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, P1S, and P1P.

Avoid using 0.4mm with Galaxy/Glitter Filament, we found cht channel tend to partial clog over time on materials. 

Documentation: https://support.dremc.com.au/en/support/solutions/articles/51000427574-install-an-e3d-high-flow-obxidian-hotend-on-your-bambu-lab

Includes

• 1 x Bambu Lab High Flow ObXidian HotEnd 0.40 mm or 0.60mm
• 1 x Thermal Grease
• 1 x Bambu Lab Sock
• 1 x Bambu Lab Heater Retaining Spring
• 2 x Bambu Lab Bolts