Description
This DREMC Galaxy Sparkle ABS Filament 1.75mm 1kg offer unique sparkle look.
- High quality ABS with added sparkle
- Higher strength compare to our ABS+ with reduce ease of print-ability in semi open enclosure such as Ender 3, we recommended a high chamber temperature at least 60-80c to reduce warping for larger prints. We recommended our ABS+ if you don't need to acetone smooth parts. May able to print smaller parts at lower chamber temperature but may find brim is required for some build surfaces.
- Cardboard spool and packaging
- Vacuum sealed bag with an additional re-usable mylar bag
-
Diameter: 1.75mm (+/- 0.03mm)
- Net weight: 1KG
- Density: 1.06 g/cm3
- Empty Cardboard Spool: ~145g=
This spool does fit in the A1 / X1 / AMS / AMS Lite / Creality CFS / Anycubic Ace system. Cardboard Plastic Spool Ring for Bambu Lab AMS: https://support.dremc.com.au/en/support/solutions/articles/51000342355-dremc-filament-snap-on-addon
Printing Settings
For best results, dry filament using a filament drier before use or print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] Filament Drying Guide
Print Profile Example: https://support.dremc.com.au/en/support/solutions/articles/51000343310-dremc-filament-3d-printing-profile
| Nozzle Temperature | 230°C - 260°C |
|---|---|
| Build Plate Temperature | 100°C - 110°C |
| Build Surface Material | Works well with most common build surfaces. We recommended PEI Build Plate (Smooth/Texture suitable) |
| Build Surface Treatment | Typically none required. Some surfaces such as glass work best with PVA glue stick or Magigoo . |
| Enclosure / Heater Chambers |
At minimal passive enclosure. Recommend VOC/Air Filtering/fume extraction or print in well ventilated room with fume extraction. |
| Cooling Fan |
LOW for better surface quality OFF for better strength |
| Printing Speed | 30 mm/s - 100 mm/s |
| Retraction | The ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help. Direct Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm/s Bowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm/s |
| Drying Recommendation | ~50°c for 4-6hrs (Only dry if filament is wet, over drying/repeat drying can damage filament) (Filament Dryer Guide) |
| Storage | Keeping filament in an airtight container with new/dried desiccant. |
| Support Material |
Single Extrusion: Idex/Tool Changer: |
Based on 0.5 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.
Sample print STL : https://www.printables.com/model/1165 , Voron SB, https://www.thingiverse.com/thing:1984879
Spool Size:
- Spool Diameter: 198mm (+/-1mm)
- Spool Hub Diameter: 52mm (+/-1mm)
- Spool Width: 65mm (+/-4mm)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Please double check product compatibility