Description
This DREMC Galaxy Sparkle ABS Filament 1.75mm 1kg offer unique sparkle look.
- High quality ABS with added sparkle
- Higher strength compare to our ABS+ with reduce ease of print-ability in semi open enclosure such as Ender 3, we recommended a high chamber temperature at least 60-80c to reduce warping for larger prints. We recommended our ABS+ if you don't need to acetone smooth parts. May able to print smaller parts at lower chamber temperature but may find brim is required for some build surfaces.
- Cardboard spool and packaging
- Vacuum sealed bag with an additional re-usable mylar bag
-
Diameter: 1.75mm (+/- 0.03mm)
- Net weight: 1KG
- Density: 1.06 g/cm3
- Empty Cardboard Spool: ~145g=
This spool does fit in the A1 / X1 / AMS / AMS Lite / Creality CFS / Anycubic Ace system. Cardboard Plastic Spool Ring for Bambu Lab AMS: https://support.dremc.com.au/en/support/solutions/articles/51000342355-dremc-filament-snap-on-addon
Printing Settings
For best results, dry filament using a filament drier before use or print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] Filament Drying Guide
Print Profile Example: https://support.dremc.com.au/en/support/solutions/articles/51000343310-dremc-filament-3d-printing-profile
| Nozzle Temperature | 230°C - 260°C |
|---|---|
| Build Plate Temperature | 100°C - 110°C |
| Build Surface Material | Works well with most common build surfaces. We recommended PEI Build Plate (Smooth/Texture suitable) |
| Build Surface Treatment | Typically none required. Some surfaces such as glass work best with PVA glue stick or Magigoo . |
| Enclosure / Heater Chambers |
At minimal passive enclosure. Recommend VOC/Air Filtering/fume extraction or print in well ventilated room with fume extraction. |
| Cooling Fan |
LOW for better surface quality OFF for better strength |
| Printing Speed | 30 mm/s - 100 mm/s |
| Retraction | The ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help. Direct Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm/s Bowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm/s |
| Drying Recommendation | ~50°c for 4-6hrs (Only dry if filament is wet, over drying/repeat drying can damage filament) (Filament Dryer Guide) |
| Storage | Keeping filament in an airtight container with new/dried desiccant. |
| Support Material |
Single Extrusion: Idex/Tool Changer: |
Based on 0.5 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.
Sample print STL : https://www.printables.com/model/1165 , Voron SB, https://www.thingiverse.com/thing:1984879
Spool Size:
- Spool Diameter: 198mm (+/-1mm)
- Spool Hub Diameter: 52mm (+/-1mm)
- Spool Width: 65mm (+/-1mm)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.