TZ1.0 Bambu Labs Hotend Upgrade - For Bambu Labs X1 / P1P Comptaible

Discontinued Product - This product has been discontinued. It is no longer available, but this page has been kept for reference or while stock last. Please see newer TZ3.0 or TZ4.0 hotend or Slice Engineering Mako or Phaetus Hotend Conch.

Search for an alternative

Features: 

• The heat sink and heat break can be disassembled and locked by the side fixed shaft to reduce maintenance costs. The assembled version have adhesive applied on nozzle thread at the factory, nozzle is easily removed. If wish to use bambu hotend for aftermarket nozzle such V6/Reprap, purchase dissemble version.  
• The TC4 titanium heatbreak tube and the heat block increases the step surface at the bottom of the throat to completely eliminate the phenomenon of the nozzle falling off and reduces the possibility of leakage.
• Unlike the stock bambu hotend, which use brass constructions, which has know to cause cracking and leaking hotend, the heater block in this aftermarket hotend is copper with nickel plating which offer longer service life. 
• Note; This hotend is design prominently users who want use bambu hotend on community toolhead as it allow you use any compatible V6 nozzle, for Bambu printer please use small nozzle from the kit as longer nozzle may cause issues on Bmabu Printers.

What is Included: 

Nozzle Variant: 

Assembled at factory: 1x Bambu Labs Compatible Hotend

Disassembled at factory: 1x Bambu Labs Compatible Hotend. Hotend is compatible with V6 nozzle but do note, require at minial torque at 1-1.5nm. Aftermarket nozzle will be taller, so we don't recommended using on stock Bambu Labs. This is not issue for aftermarket hotend such as Dirtybird or modified CW2/SB 

Note: Heater, thermistor or socks are not included. X1 Bambu Hotend Heater/Thermistor available here: https://store.dremc.com.au/products/bambu-style-rapido-v2-heater-cartridge-bean-style-thermistors

P1P Series Heater and Thermeristor:

Note: Assembled at factory have nozzle glued, if you wish to third party nozzle, please purchase dis-assemble version. 

Note: The assembled at factory still require some assembly as shown in photo #4. The assembled mean the nozzle are pre-installed.