Description
This Ramalama Idler Fastener installation kit includes all the fasteners needed to install the a set of Ramalama to your Voron 2. Require existing F695-2RS.
Do note, does not include any 3D printed parts. Please ensure you choose correct file for trident/2.4 printers.
More Information: https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers
Photo Assembly Source: https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers
Kit BOM V2: (BOM Last Updated: 11.9.23) [ Now Shipping V2] - Bearing are not pre-installed or included, sand paper are included to sand down pin to suit your existing bearings. (Lower cost, to account to not included LDO bearings) Available here: https://store.dremc.com.au/products/ldo-f695-2rs-bearings-5x13x4mm-1pc
Bolt Fastener Material: Stainless Steel 304
Pin: (Material: SUJ2/100Cr6/GR15, Hardness HRC58-62)
| Item | QTY |
| M3x40 SHCS |
8 |
| M3x30 SHCS | 8 |
| M3x10 SHCS | 4 |
| M3 Washers |
8 |
| M5 Precision Washers (LDO Sourced) |
4 |
| M3 Heatset Inserts | 8 |
| 5x18 G6 Pins |
4 |
| 6x3mm neodymium round magnets |
4 |
| Sand Paper | 2 |
Kit BOM V1: (BOM Last Updated: 4.9.22) [Purchaser Before 19/09/23]
Bolt Fastener Material: Stainless Steel 304
Pin: (Material: SUJ2/100Cr6/GR15, Hardness HRC58-62)
Do Note, these ship with the 40mm SHCS version of the screws and require this printed part housing in alternative folder or if you kit have spare M3x30 SHCS you can use stock design.
| Item | QTY |
| M3x40 SHCS |
8 |
| M3x10 SHCS | 4 |
| M3 Washers |
8 |
| M5 Precision Washers (LDO Sourced) |
8 |
| M3 Heatset Inserts | 8 |
| 5x18 G6 Pins |
4 |
| 6x3mm neodymium round magnets (LDO Sourced) |
4 |
| F695-2RS (LDO Sourced) |
4 |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.