125x125mm Smooth & Textured PEI Spring Steel Flex Plate for Voron 0

Documentation[Read Before Purchase]: https://support.dremc.com.au/en/support/solutions/articles/51000300850-dremc-texture-smooth-pei-beds

What is included:

• 1x Flex Plate (Doubled Sided Mixed - Smooth PEI and Textured PEI)
  
• 1x Spare Magnetic  (max 130℃ , <110℃ Recommended )
  

Features:

• Double Sided PEI Coated Sheet (Smooth and Textured Surface)
  
• Ultem 1000 PEI Sourced from GE USA.
• 0.5mm Thickness Steel Plate (125x125mm) (After 17/05/2024 125x125 size)
  
• Flexible, Removable, stick to magnets very well
• Suits variety of filaments, such as not limited to PLA / PETG / ABS / TPU / Polycarbonate
  
• Free clean- just flex the plate a little then take the prints off after cooled
• Fast heater performance, less waiting time after printing.
• Suitable for Voron 0.1 01 0.2 02 3D Printer

 Other PEI Bed Sizes: DREMC PEI Build Plates Collection

REMEMBER TO REMOVE PROTECTION FILM ON SMOOTH PEI BEFORE PRINTING.

https://support.dremc.com.au/en/support/solutions/articles/51000300850-dremc-texture-smooth-pei-beds

Tiny dots/bubble may appear on the Smooth PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim. These tiny dots/bubble gradually reduce over a couple of thermal cycle (prints jobs). Warranty claim is only for DOA/defective with steel sheet, PEI Film, textured finished. We do not cover user removing applied smooth PEI film by mistake or user error.

**Frosted/Texture PEI recommended for PETG and ABS/ASA prints but can also do many other materials, the smooth side should only be used with PLA, other materials will adhere but might form too much adhesion without the use of a release agent**. More Info. Only remove printed parts PETG off the texture side once cooled, removing while still hot could result damage to PEI sheet.

Printable Spacers for springs suitable, if find spring is too loose due to a fixed limit switch.

https://www.thingiverse.com/thing:2541312/files