Revo™ High Temperature HTA / HTA High Flow Nozzles

These HTA Revo nozzles are high-temperature, abrasive-resistant nozzles. If your printing application also requires high flow, check out our High Flow HTA nozzles.

Much like ObXidian, HTA nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide additional abrasive resistance, corrosion prevention and non-stick properties for printing up to 500°C.

High Flow HTA nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance, additional corrosion prevention and non-stick properties for printing up to 500°C.    

Please note:   

Whilst HF HTA nozzles can be used with 40W & 60W HeaterCores, they will be temperature limited to 300°C. To print up to 500°C, we advise that you upgrade to one of our Revo High Temperature Hotside kits. 

Product includes: (SF= Standard Flow, HF= High Flow)

• 1 x 0.25mm or 0.4mm or 0.6mm or 0.8mm HT Nozzle (Depending on Selection)

Higher Flow.  

Revo HF HTA increases your setup's volumetric flow rate, enabling you to print high temperature, abrasive materials faster!  

How does this work?  

Revo HF HT-A maintains the exact same form factor as standard Revo HotEnds; this means there is no need to adjust your pre-existing mount and fan duct setups! These High Flow nozzles use a unique custom internal geometry to increase the surface area for improved thermal transfer to the filament.