Bondtech have to make the best extruders if you ask me. I've had a bunch of them ranging from the lite all the way to the pro.

This thing has some PULL. It'll drag your dryer up from a shelf 😂

All jokes aside, this is one top notch extruder and you definitely get your money's worth.

Another quality LDO product. Tested it against the EBB36 since it's the direct competitor and ease of use was astounding. Hooking it up via USB makes it so easy compared to setting up CANbus. However, if you like CANbus and have a ton of peripherals, CAN will be the way to go.

The original version had it's issues but LDO was quick to acknowledge and fix it with a revision.

Can't go wrong!

If you're needing GOOD quality rails, don't go past these.

I had a few sets from AliExpress that had so many issues, they were replaced with these and you can FEEL how much better quality they are.

Will be getting these instead of wasting money next time. Can't go past LDO

If you're needing GOOD quality rails, don't go past these.

I had a few sets from AliExpress that had so many issues, they were replaced with these and you can FEEL how much better quality they are.

Will be getting these instead of wasting money next time. Can't go past LDO

This is probably my favourite filament to print with out of all of DREMC filament and others.

If you need a strong, easy print filament that will survive long periods outside, this is the filament you want.

I've used both ASA and ASA sparkle ALOT and I highly recommend it. Prints super easy and amazing quality as you'd expect.

This is probably my favourite filament to print with out of all of DREMC filament and others.

If you need a strong, easy print filament that will survive long periods outside, this is the filament you want.

I've used both ASA and ASA sparkle ALOT and I highly recommend it. Prints super easy and amazing quality as you'd expect.

Been printing tons of tyres and gaskets with this lately, first ever TPU I've printed and after following the guides, prints absolutely amazing. Just have to make sure it's super dry before you print it, or like most filaments you'll get poor surface quality and stringing.

Once dry, no issues!!

Really love this filament it’s so pretty when printed. Really does pop and draw your eyes

Easy module to install. Old one had issues after backing up some filament which affected the thermistor, which became clear in the post-mortem. At the time, it had lots of random errors popping up.
Swapped with this one - no more issues.

I had been struggling with the old glass plate on myEnder 5plus and could not get stuff to stick and when it did I couldn’t get it off. Th new flexible plate is great for first layer and easy to remove prints, worth every bit

Brought to replace old unit and works great

Brought these as spares.

Easy to install and setup in my dragonburner toolhead, heats up very quickly. Very excited to get this fully running when my voron is finally alive

Awesome fast shipping and great stock availability, have exactly what i need when i need it

So far so good, havent got it in full production yet but was super simple to setup.