Description
KUSBA is an all in one accelerometer solution to measure resonances for your 3D printer.
With an integrated RP2040 mcu and onboard ADXL345 diy wiring and soldering is no longer required – just a USB-C to USB-A cable (Available 1.8m with/without cable).
Designed by xbst / Isik’s Tech – every purchase directly supports his efforts for further research and development into this and other projects.
Board are pre-flashed, if not being detected on klipper please try reset the device and re-flash more update to date kipper bin. As there many be compatible changes between different klipper version. (Holding the reset button while plugging in the device).
New board is pre-flashed with "Ampon". More Info: https://github.com/xbst/KUSBA/blob/main/Docs/v2-Rampon-Firmware.md (PCB Version: V2.4)
What is Included:
- 1x Kusba USB ADXL345 Module
Optional:
- 1x 1.8m Type C to Type A USB Cable (Depending on your selection)
Note: Module is available separately without require type c to a cable or with 1.8mm cable which is suitable for most raspberry pi.
Documentation:
Written Documentation: https://github.com/xbst/KUSBA
Install Video: https://www.youtube.com/watch?v=gtrQXdAaXB4
Printed Bracket: https://github.com/xbst/KUSBA/tree/main/Mounts
Note: Mount Spacing is 30mm, if you have 30mm fan you can mount directly onto the fan using existing bolt in most case otherwise you may require longer bolt.
Cad: https://github.com/xbst/KUSBA/tree/main/CAD
How to Configure Klipper
[mcu adxl]
serial: /dev/serial/by-id/usb-Anchor_Rampon-if00
[adxl345]
cs_pin: adxl:CS
[resonance_tester]
accel_chip: adxl345
probe_points:
0,0,0
# Edit the above line with the correct probe points location. I recommend the center of your bed for X & Y, 20 for Z.
# For 350 mm printers: 175,175,20
# For 300 mm printers: 150,150,20
# For 250 mm printers: 125,125,20
# For 120 mm printers: 60,60,20
# More info: https://www.klipper3d.org/Config_Reference.html#adxl345
Deliveries within Australia
For shipping prices, please use the above estimated shipping costs. Shipping costs depend on your location, order size, and desired courier service and provider. Orders are dispatched within the same or by next business day for in-stock products from local Brisbane Queensland warehouse depending on courier. Courier Please/Aramex rates are calculated only at checkout.
We highly suggest using AusPost Express for urgent deliveries or AusPost Standard for remote/rural areas. If you want us to manual quote freight for large complex order, please contact support for quote. As larger flat items and long product are shipped separately compared to general spares/filament to ensure those arrived safely. We suggest you pick a carrier and service you have good previous experience with for best delivery experience.
Aramex, CourierPlease, and AusPost Tracked Letter are excluded from same-day dispatch and will be dispatched within 1-3 business days. See our full policy and expectation: https://store.dremc.com.au/policies/shipping-policy
Our domestic shipping rates start at:
- from $9+ AusPost Standard Post (typically 2-10+ business days*, tracked)
- from $10 + AusPost Express Post (typically 1 to 4+ business days*, tracked)
- from $9+ Aramex, Courier Please) (typically 1-7+ business day* within Metro SE QLD/NSW/VIC/ACT, 3-12+ business days interstate, tracked) (We don't recommended this service for WA/TAS or urgent orders)
Pricing will depends on order size (weight/cubic size) and delivery location.
Please note that we do not offer any courier transit time guarantees or compensation if the item arrives later than expected. The provided ETA reflects the courier's estimated transit time after the item has been picked up. Please also account for an additional 1-3 business days for rural or remote areas or potentially delay with delivery network outside their controls such as localised weather events.
Please use below as shipping time frame expectations for metro area. All order will be ready to be pick up by courier by next business day or same day for some couriers, on rare occasional outside our control miss pickup by courier can occur, if that occurs item may be delay by 1-2 business day and we will make other arrangement to have item dispatch in a reasonable time frame.
https://auspost.com.au/service-updates/domestic-delivery-times
https://www.dhl.com/au-en/home/get-a-quote.html
https://www.aramex.com.au/media/2406/
|
Delivery Method |
QLD |
NSW/ACT |
SA/VIC |
NT/WA/TAS |
|
AusPost Express Parcel |
1-2 |
1-3 |
1-3 |
2-6 |
|
AusPost Standard Parcel |
1-3 |
1-5 |
3-7 |
3-10 |
|
DHL Express |
1-2 |
1-4 |
1-5 |
2-6 |
| Courier Please / Aramex | 1-7 | 2-7 | 3-7 | 10 - 15 |
Deliveries to New Zealand / World
All delivery to New Zealand / World is calculated based on selected service. Depending on situation, if we unable to send to country due to current world events, we may cancel your order. Please refer to below links for service updates/potential delays.
Please refer to AUSPOST Website for latest news and postage delivery time estimate to your area. https://auspost.com.au/service-updates/international-delivery-times
- Standard (Signature On Delivery & Extra Cover): 7-14+ Business Days to Metro Area
- Express (Signature On Delivery & Extra Cover): 5-10+ Business Days to Metro Area
- DHL: 1-5+ Business Days (Contact us for quote) For select region DHL pricing is available at checkout for general spares.
- Fedex/DHL are quoted at checkout, delivery time will depend on service and delivery location.
Please note that shipping rates/total order are not inclusive of any local taxes, duties or import fees when the shipment passes through customs in the country of delivery (unless specified at checkout). You may require to pay additional tax or custom duty, we cannot adjust order value.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
TDS / SDS :
Related Products
Please double check product compatibility