{"title":"DrHotSwap","description":"\u003cp\u003eIntroducing \u003cstrong\u003eDrHotSwap\u003c\/strong\u003e, a hot-swappable spare part collection specifically designed for \u003cstrong\u003eDREMC\u003c\/strong\u003e and compatible with a wide range of 3D printers, including \u003cstrong\u003eCreality\u003c\/strong\u003e, \u003cstrong\u003ePrusa\u003c\/strong\u003e, and various DIY builds. The thermistor and heater modules can be quickly removed and replaced using \u003cstrong\u003eMolex Micro Fit\u003c\/strong\u003e connectors for heaters, which are compact and rated for higher current, making them reliable and widely used.\u003c\/p\u003e\n\u003cp\u003eThis design means you only need to replace the module, resulting in lower costs and significant time savings since there’s no need to re-route wiring. You can easily build a couple of replacement toolheads or hotends, allowing for quick swaps whenever you need to change materials, nozzles, or address filament blobs.\u003c\/p\u003e\n\u003cp\u003eWe offer a range of thermistor types, including \u003cstrong\u003ePT1000\u003c\/strong\u003e, \u003cstrong\u003e100K\u003c\/strong\u003e, and \u003cstrong\u003e104NT\u003c\/strong\u003e, enabling you to print with nearly 99% of FDM materials available on the market. Our heater cartridges are designed for high flow nozzles, providing sufficient wattage to ensure consistent melt flow.\u003c\/p\u003e\n\u003cp\u003eAll heaters are rated up to \u003cstrong\u003e500°C\u003c\/strong\u003e and constructed from high-quality stainless steel for enhanced temperature reliability, even heating and ease of installation. Our thermistor cartridges and screw thermistors feature built-in strain relief for improved reliability. Similar newer batches are using ADR tech to solder thermeristor module into tube for better reliability from being damaged from rougher handling. \u003c\/p\u003e\n\u003cp\u003eAdditionally, we offer 90-degree heater cartridges, which reduce strain on the connection at the heater, making them ideal for standard hotends. \u003c\/p\u003e","products":[{"product_id":"100k-3950-100k-ohm-thermistor-hotswapable-for-ender-3-5-series","title":"3950 100K Bean Style Thermistor 1.5M \/ 2M DrHotSwap For Creality Printers","description":"\u003cp\u003eAre you always replacing your thermistor and want reduce down time on your printers? This is cost effective method where you only replace the shorter 17cm instead of running new thermistor or splicing wires.  \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Glass Bean thermistor with fiber glass sleeve for better temperature resistance, rated up to 300c compare to stock Creality 280c.\u003c\/li\u003e\n\u003cli\u003eAvailable with extension and without, lower future replacement cost or easily change to different thermistor form factor. [\u003ca title=\"DrHotSwap thermistor\/heater range\" data-mce-fragment=\"1\" href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Accuracy within 1%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce you have installed with a extension kit, you will only need to purchase non extension kit in the future if you need to replace the thermistor or heater. \u003c\/p\u003e\n\u003ch3\u003eExtension Cable :\u003c\/h3\u003e\n\u003cp\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality and other 3D Printer where thermistor plug in to JST XH2.54 header) Other printer may be supported, just measure the cable loom of existing cable select a suitable extension. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1000mm(1m) (Ender 3\/3v2, Ender 2 Pro)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1500mm(1.5m) (Ender 3 Max, Ender 5 Pro, CR10-Mini)\u003c\/li\u003e\n\u003cli\u003e2000mm(2m) (Ender 5 Plus)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e550mm with XHP JST Lock (For CR-10S Pro \/ CR-10 V2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThermistor Specification: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThermistor Type : 100K 3950\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eTemperature Range: -30 c to 300 c. \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eFirmware Note\u003c\/strong\u003e: \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eFirmware configuration or re PID tune your hotend if you find temperature inaccuracy. Please apply changes below. This is still suitable for stock Creality firmware, but will require temperature tower to re-tune temperature for some filament. In our testing we find temperature difference ~5-10c without below modification does not effect printing common materials such as PLA\/PETG. In most case, temperature tower will adjust for the inaccuracy using stock marlin thermistor option. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003e\u003cstrong\u003eMarlin\u003c\/strong\u003e (configuration.h)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003e#define TEMP_SENSOR_0 13 \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003e\u003cstrong\u003eKlipper\u003c\/strong\u003e - tested using PT1000 Pro \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cblockquote data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003e[thermistor DREMC NTC100K B3950]\u003cbr data-mce-fragment=\"1\"\u003etemperature1: 25.0\u003cbr data-mce-fragment=\"1\"\u003eresistance1: 103180.0\u003cbr data-mce-fragment=\"1\"\u003etemperature2: 150.0\u003cbr data-mce-fragment=\"1\"\u003eresistance2: 1366.2\u003cbr data-mce-fragment=\"1\"\u003etemperature3: 250.0\u003cbr data-mce-fragment=\"1\"\u003eresistance3: 168.6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eWiring\/Connection Spec: \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eThermistor Wire Specs (Module): UL1332 26AWG 200°C (Note: This is wiring from module connector to the black heat shrink)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eExtensions Cable Wire Spec: UL3398 26AWG 150°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eModule Connection Specs: TJC8A \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eModule Connection Operating Ambient Temperature: -25°C~85°C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":41891675766953,"sku":"75766953","price":6.0,"currency_code":"AUD","in_stock":true},{"title":"1m","offer_id":41891675701417,"sku":"75701417","price":9.0,"currency_code":"AUD","in_stock":true},{"title":"1.5m","offer_id":41970903023785,"sku":"03023785","price":11.0,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":41891675734185,"sku":"75734185","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"550mm (XHP) for CR-10S Pro \/ CR-10 V2","offer_id":44709141086377,"sku":"41086377","price":11.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/3950-100k-bean-style-thermistor-15m-2m-drhotswap-for-creality-printers-75766953-2322350.jpg?v=1755909465"},{"product_id":"1-5m-2m-24v-40w-heater-cartridgehotswapable-for-ender-3-5-series","title":"24V 40W Heater Cartridge DrHotSwap HotSwappable Universal For 3D Printer","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 12cm instead of running new Heater cartridge or splicing wires.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Heater with ferrules extension wire connection to ensure reliability\u003c\/li\u003e\n\u003cli\u003eEasily to cable manage and flexible extension cable.\u003c\/li\u003e\n\u003cli\u003eQuick and low future replacement spare cost. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\" data-mce-fragment=\"1\" title=\"DrHotSwap Thermistor and Heater\"\u003eExplore Range\u003c\/a\u003e]\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtension Cable:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality or other printers that use screw terminals for heater cartridge and the voltage and wattage is suitable)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1000mm(1m) (Ender 3\/3v2, Ender 2 Pro)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1500mm(1.5m) (Ender 3 Max, Ender 5 Pro, CR10-Mini, Prusa Printers, Ender 3 Neo, Ender 3 v2 Neo)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2000mm(2m) (Ender 5 Plus, Ender 3 Max Neo)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeater specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 40w\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExtension Quick Connectors: \u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnector on module:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\"\u003e43645-0200\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector on extension cable:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\"\u003e43640-0201\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNote: Between batches cable extension may be red\/black wiring.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan size=\"4\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":41891711942825,"sku":"11942825","price":8.0,"currency_code":"AUD","in_stock":true},{"title":"1.5m","offer_id":41891711877289,"sku":"11877289","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":41891711910057,"sku":"11910057","price":13.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/products\/24v-40w-heater-cartridge-drhotswap-hotswappable-universal-for-3d-printer-11877289-3964841.jpg?v=1755909463"},{"product_id":"100k-3950-100k-ohm-cartridge-style-thermistor-1-5-2m","title":"3950 100K Cartridge Style thermistor 1.5 \/ 2M DrHotSwap HotSwappable For Creality Printers","description":"\u003cp data-mce-fragment=\"1\"\u003eAre you always replacing your thermistor and want reduce down time on your printers? This is cost effective method where you only replace the shorter 17cm instead of running new thermistor or splicing wires.  \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures: \u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Quality cartridge style thermistor with fiber glass sleeve for better temperature resistance and built strain relief. Suitable for upgrading existing Creality printers to Volcano and V6 Heater block for instance. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAvailable with extension and without, lower future replacement cost or easily change to different thermistor form factor. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e] \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Accuracy within 1%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOnce you have installed with a extension kit, you will only need to purchase non extension kit in the future if you need to replace the thermistor or heater. \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtension Cable :\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality and other 3D Printer where thermistor plug in to JST XH2.54 header) Other printer may be supported, just measure the cable loom of existing cable select a suitable extension.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1000mm(1m) (Ender 3\/3v2, Ender 2 Pro)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1500mm(1.5m) (Ender 3 Max, Ender 5 Pro, CR10-Mini, Ender 3 Neo, Ender 3 V2 Neo*) (CR10 Smart**)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2000mm(2m) (Ender 5 Plus)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThermistor Specification: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThermistor : 100K 3950\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eTemperature Range: -30 c to 300 c. \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"product-meta__sku\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"product-meta__sku-number\" data-mce-fragment=\"1\"\u003e*Depending on your Neo series batch hotend, you may have bean style thermistor, if so opt for MK8 heater block. More Info: \u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000344286-ender-3-neo-series-spare-part-compatibility-table\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan class=\"product-meta__sku\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"product-meta__sku-number\" data-mce-fragment=\"1\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000344286-ender-3-neo-series-spare-part-compatibility-table\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product-meta__sku\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"product-meta__sku-number\" data-mce-fragment=\"1\"\u003e**You will need cable manage the extra length. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFirmware Note: \u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFirmware configuration if you find temperature inaccuracy. Please apply changes below. This is still suitable for stock Creality firmware, but will require temperature tower to re-tune temperature for some filament. In our testing we find temperature difference ~5-10c without below modification does not effect printing common materials such as PLA\/PETG. In most case, temperature tower will adjust for the inaccuracy using stock marlin thermistor option. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan data-mce-fragment=\"1\"\u003eMarlin \u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e(configuration.h)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e#define TEMP_SENSOR_0 13 \u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan data-mce-fragment=\"1\"\u003eKlipper\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003etested using PT1000 Pro \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e[thermistor DREMC NTC100K B3950]\u003cbr data-mce-fragment=\"1\"\u003etemperature1: 25.0\u003cbr data-mce-fragment=\"1\"\u003eresistance1: 103180.0\u003cbr data-mce-fragment=\"1\"\u003etemperature2: 150.0\u003cbr data-mce-fragment=\"1\"\u003eresistance2: 1366.2\u003cbr data-mce-fragment=\"1\"\u003etemperature3: 250.0\u003cbr data-mce-fragment=\"1\"\u003eresistance3: 168.6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003eWiring\/Connector Specification: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eThermistor Wire Specs (Module): UL1332 26AWG 200°C (Note: This is wiring from module connector to the yellow heat shrink)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eExtensions Cable Wire Spec: UL3398 26AWG 150°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eModule Connection Specs: TJC8A \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eModule Connection Operating Ambient Temperature: -25°C~85°C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":41986635989161,"sku":"35989161","price":6.5,"currency_code":"AUD","in_stock":true},{"title":"1.5m","offer_id":41986635923625,"sku":"35923625","price":12.5,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":41986635956393,"sku":"35956393","price":13.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/3950-100k-cartridge-style-thermistor-15-2m-drhotswap-hotswappable-for-creality-printers-35989161-3777608.jpg?v=1755909420"},{"product_id":"104nt-4-semitec-cartridge-style-thermistor-for-3d-printers","title":"104NT-4 Semitec Cartridge Style Thermistor 1.5\/2M DrHotSwap HotSwappable for V6\/Volcano","description":"\u003cp\u003eAre you always replacing your thermistor and want reduce down time on your printers? This is cost effective method where you only replace the shorter 17cm instead of running new thermistor or splicing wires.  \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures: \u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Quality cartridge style thermistor with fiber glass sleeve for better temperature resistance and include built in strain relief. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAvailable with extension and without, lower future replacement cost or easily change to different thermistor form factor or even new thermistors. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Accuracy within 1%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce you have installed with a extension kit, you will only need to purchase non extension kit in the future if you need to replace the thermistor or heater. \u003c\/p\u003e\n\u003ch3\u003eExtension Cable :\u003c\/h3\u003e\n\u003cp\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality and other 3D Printer where thermistor plug in to JST XH2.54 header) Other printer may be supported, just measure the cable loom of existing cable select a suitable extension.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500mm(1.5m) (Ender 3 Max, Ender 5 Pro, CR10-Mini, Prusa Printers*)\u003c\/li\u003e\n\u003cli\u003e2000mm(2m) (Ender 5 Plus) (Suitable for Mainboard located outside enclosures for ender 3 v2 for instance. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Prusa MK3 (Plug and play)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Prusa Printers, require some modification on XH2.54 connector for full plug and play.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eExtension Cable Colour may black or white between batches. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eThermistor Specification \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eThermistor temperature range: -50 c - 300 c\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eThermistor : 104NT-4 Semitec\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eCartridge Size: 3mm diameter \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware Information: \u003c\/h3\u003e\n\u003ch4\u003eMarlin Firmware Configuration:\u003c\/h4\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.33a4598cPEhKi6\" align=\"start\"\u003e\u003cspan\u003e* 5 : 100K thermistor - ATC Semitec 104GT-2\/104NT-4-R025H42G(Used in ParCan \u0026amp; J-Head) (4.7k pullup)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i4.33a4598cPEhKi6\" align=\"start\"\u003e\u003cspan\u003e#define TEMP_SENSOR_0 5\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 align=\"start\"\u003e\u003cstrong\u003eRepetier:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003eATC Semitec 104GT-2\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 align=\"start\"\u003e\u003cstrong\u003eKlipper documentation:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003esensor_type: ATC Semitec 104NT-4-R025H42G\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 align=\"start\"\u003e\u003cstrong\u003eDuet 3D:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003eM305 P1 T100000 B4658 C6.5338987554e-08\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eWiring\/Connection Spec: \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eThermistor Wire Specs (Module): UL1332 26AWG 200c (Note: This is wiring from module connector to the yellow heat shrink)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eExtensions Cable Wire Spec: UL3398 26AWG 150°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eModule Connection Specs: TJC8A \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003eModule Connection Operating Ambient Temperature: -25℃~85℃\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":41986739536041,"sku":"39536041","price":6.0,"currency_code":"AUD","in_stock":true},{"title":"1.5m","offer_id":41986739470505,"sku":"39470505","price":11.0,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":41986739503273,"sku":"39503273","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"For Prusa MK3","offer_id":44513461436585,"sku":"61436585","price":12.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/104nt-4-semitec-cartridge-style-thermistor-152m-drhotswap-hotswappable-for-v6volcano-39536041-3312969.jpg?v=1755909340"},{"product_id":"24v-50w-heater-cartridge-1-5m-2m-hotswapable-for-3d-printers","title":"24V 50W Heater Cartridge 2M DrHotSwap HotSwappable for 3D Printers","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 12cm instead of running new Heater cartridge or splicing wires.  \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Heater with ferrules wire connection to ensure reliability\u003c\/li\u003e\n\u003cli\u003eEasily to manage and flexible extension cable.\u003c\/li\u003e\n\u003cli\u003eQuick and low future replacement spare cost\u003c\/li\u003e\n\u003cli\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExtension Cable :\u003c\/h3\u003e\n\u003cp\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality and other printers that use screw terminals for heater cartridge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2000mm(2m) (Ender 5 Plus, Ender 3 Max, Ender 5 Pro, CR10-Mini, Ender 3\/3v2, Ender 2 Pro, Prusa Printers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThese heaters are more than capable of reaching temperatures that will soften aluminium blocks. These recommenced only be used with a copper block. Please also ensure firmware thermal runway safety  features is turn on and tested.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHeater specifications \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 50w\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnector\/Wire Specification: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNote: Between batches cable extension may be red\/black wiring.\u003c\/li\u003e\n\u003cli\u003eConnector on module:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\"\u003e43645-0200\u003c\/a\u003e \u003cspan\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector on extension cable:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\"\u003e43640-0201\u003c\/a\u003e \u003cspan\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eOEM: Trianglelabs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":41986766602409,"sku":"66602409","price":9.45,"currency_code":"AUD","in_stock":false},{"title":"2m","offer_id":41986766569641,"sku":"66569641","price":14.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/24v-50w-heater-cartridge-15m2m-drhotswap-hotswappable-for-3d-printers-66536873-2533735.jpg?v=1755909338"},{"product_id":"3950-100k-104gt-2-m3-screw-fitting-thermistor-drhotswap-hotswapable-module-only","title":"3950 100K \/ 104GT-2 \/ PT1000 M3 Screw Fitting Thermistor DrHotSwap HotSwappable Module ONLY","description":"\u003cp\u003eAre you always replacing your thermistor and want reduce down time on your printers? This is cost effective method where you only replace the shorter 17cm instead of running new thermistor or splicing wires.  \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality  M3 Screw Fitting Thermistor with fiber glass sleeve for better temperature resistance and built in strain relief.\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eDrop-in replacement for Creality Ender 3, Wanhao Duplicator i3, Maker Select V1, V2, V2.1 3D printers, also compatible with V6 hotend. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eModule only, available in both 100k or 104GT-2 or PT1000 (High Temp) variant. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Accuracy within 1%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModule Only [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e] , \u003ca href=\"https:\/\/store.dremc.com.au\/products\/drhotswap-hotswapable-extension-cable\" title=\"drhotswap extension cable\"\u003eextension cable here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandy tighten only at room temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNOTE: Should only be hand tightened while module is not connected to the extension wire. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eThermistor Type \u003c\/h3\u003e\n\u003ch4\u003eThermistor : \u003cstrong\u003e100K 3950\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eTemperature Range: -30 c to 300 c.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eCable Length: ~17cm. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor :100K 3950\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThermistor : \u003cstrong\u003e104NT-2\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eCable Length: ~17cm. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor temperature range: -50 c - 300 c\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor : 104NT-2 Semitec\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eExpected Life @ 1000 Hours at 300 c (Dry Heat)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThermistor : \u003cstrong\u003ePT1000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eCable Length: ~17cm. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor temperature range: -50 c - 450 c (500c Max)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor : \u003cstrong\u003ePT1000 Pro\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHigh Accuracy within 1% (Class B Module)\u003cspan size=\"4\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware Note: \u003c\/h3\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003eFirmware configuration if you find temperature inaccuracy. Please apply changes below. This is still suitable for stock Creality firmware, but will require temperature tower to re-tune temperature for some filament. In our testing we find temperature difference ~5-10c without below modification does not effect printing common materials such as PLA\/PETG. In most case, temperature tower will adjust for the inaccuracy using stock marlin thermistor option.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003eMarlin (configuration.h)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e#define TEMP_SENSOR_0 13\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003eKlipper - tested using PT1000 Pro\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cspan size=\"4\"\u003e[thermistor DREMC NTC100K B3950]\u003cbr\u003etemperature1: 25.0\u003cbr\u003eresistance1: 103180.0\u003cbr\u003etemperature2: 150.0\u003cbr\u003eresistance2: 1366.2\u003cbr\u003etemperature3: 250.0\u003cbr\u003eresistance3: 168.6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan size=\"4\"\u003eWiring\/Connection Spec: \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eThermistor Wire Specs (Module): UL1332 26AWG 200c (Note: This is wiring from module connector to the yellow heat shrink)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eExtensions Cable Wire Spec: UL3398 26AWG 150°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eModule Connection Specs: TJC8A (Compatible with Molex-50-57-94) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"4\"\u003eModule Connection Operating Ambient Temperature: -25℃~85℃\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DREMC","offers":[{"title":"104NT-2","offer_id":42090848682153,"sku":"48682153","price":7.4,"currency_code":"AUD","in_stock":false},{"title":"100K 3950","offer_id":42090848911529,"sku":"48911529","price":7.4,"currency_code":"AUD","in_stock":false},{"title":"PT1000","offer_id":45453732970665,"sku":"32970665","price":22.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/products\/3950-100k-104gt-2-pt1000-m3-screw-fitting-thermistor-drhotswap-hotswappable-module-only-48682153-7750817.jpg?v=1755909292"},{"product_id":"pt1000-high-temperature-450c-drhotswap-hotswapable-module-only","title":"DRHOTSWAP PT1000 Pro High temperature thermistor (450°C) 2M","description":"\u003cp\u003eAre you always replacing your thermistor and want reduce down time on your printers? This is fast and cost effective to replace defective thermistor, this is PT1000 version for high temperature rating and printing. \u003c\/p\u003e\n\u003ch3\u003eFeature:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Temperature PT1000 Sensor up to 450°C, it possible without amplifier board with default 4.7k pull up resistor but will get lower accuracy. To get full \u003cspan data-mce-fragment=\"1\"\u003ebenefits \u003c\/span\u003eyou will need board that supports PT1000 by default like some Bigtreetech boards or replace the 4.7K pullup resister of the thermistor pins with a included 1K 0.1% resister, require SMD soldering. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasily change to different thermistor form factor. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\" data-mce-fragment=\"1\"\u003eExplore Range\u003c\/a\u003e]\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Accuracy within 1% (Class B Module)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExtension Cable: 2M\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eThermistor Specification: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThermistor : PT1000\u003c\/li\u003e\n\u003cli\u003eThermistor Cartridge: L:15mm , D: 3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Depending on batch, the strain relief may be excluded so module may be fully glass fibres sleeves without strain relief for more flexibility. If you have preference, please leave a message at cart or let us know before you place for us to confirm availability on your preference. \u003c\/p\u003e\n\u003ch3\u003eFirmware Documentation \u003c\/h3\u003e\n\u003ch4\u003eFor Klipper: \u003c\/h4\u003e\n\u003cdiv align=\"start\"\u003eDefault 4.7K pullup resistor and set thermistor type to PT1000, if you have different pull, you will need update depending on mainboard\/toolhead board.\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch4\u003eFor Duet2 Wifi\u003c\/h4\u003e\n\u003cp\u003eM308 S1 P\"e0temp\" Y\"pt1000\" R2000 ;two 1K resistors in series for better accuracy\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMarlin:\u003c\/h4\u003e\n\u003cdiv align=\"start\"\u003eDefault 4.7Kpullup resistor please choose sensor '1047'\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003eIf you have replaced pullup with 1K resistor please choose sensor '1010'\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003eConfiguration.h:\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e*1047 : Pt1000 with 4k7 pullup\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e*1010 : Pt1000 with 1k pullup(non standard)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_0 1010\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_1 0\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_2 0\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_3 0\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_4 0\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e#define TEMP_SENSOR_BED 1\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ethermistortable_1010.h:\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\/\/ Pt1000 with 1k0 pullup\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003econst short temptable_1010[][2] PROGMEM = {\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(    0, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(  25, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(  50, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(  75, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(100, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(125, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(150, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(175, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(200, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(225, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(250, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(275, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(300, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(325, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(350, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(375, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(400, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(425, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(450, 1000, 1000)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e};\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ethermistortable_1047.h:\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\/\/ Pt1000 with 4k7 pullup\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003econst short temptable_1047[][2] PROGMEM = {\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e\/\/ only a few values are needed as the curve is very flat\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(    0, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(  50, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(100, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(150, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(200, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(250, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(300, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(350, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(400, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003ePtLine(450, 1000, 4700)\u003c\/div\u003e\n\u003cdiv align=\"start\"\u003e};\u003c\/div\u003e","brand":"DREMC","offers":[{"title":"2M","offer_id":42096323985577,"sku":"23985577","price":28.45,"currency_code":"AUD","in_stock":true},{"title":"None","offer_id":43446629007529,"sku":"29007529","price":25.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/drhotswap-pt1000-pro-high-temperature-thermistor-4500c-2m-23985577-5536243.jpg?v=1755909293"},{"product_id":"drhotswap-hotswapable-extension-cable","title":"DrHotSwap HotSwappable Extension Cable","description":"\u003cp\u003eThis is listing for DRHOTSWAP Extension cable sold individually if you find you will need a replacement.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDo note, cable colour may change between batches.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWiring Spec:\u003c\/p\u003e\n\u003cp\u003eThermistor Extension Cable: UL3398 150°C 300V 26 AWG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeater Extension Cable: UL3239 20 AWG 200°C Silicone\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeater Connector: Molex Micro Fit 3.0 Horizontal\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"Thermistor 2M","offer_id":42287763947689,"sku":"63947689","price":7.0,"currency_code":"AUD","in_stock":true},{"title":"Thermistor 1M","offer_id":42287771517097,"sku":"71517097","price":5.0,"currency_code":"AUD","in_stock":false},{"title":"Heater 1M","offer_id":42420196081833,"sku":"96081833","price":6.0,"currency_code":"AUD","in_stock":true},{"title":"Heater 2M","offer_id":42287771549865,"sku":"71549865","price":7.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/products\/drhotswap-hotswappable-extension-cable-63947689-6821714.jpg?v=1755909116"},{"product_id":"24v-60w-heater-cartridge-drhotswap-for-3d-printers","title":"24V 60W Heater Cartridge 1.5M\/2M DrHotSwap HotSwappable for 3D Printers","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 12cm instead of running new Heater cartridge or splicing wires.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Heater with ferrules wire connection to ensure reliability\u003c\/li\u003e\n\u003cli\u003eEasily to manage and flexible extension cable.\u003c\/li\u003e\n\u003cli\u003eQuick and low future replacement spare cost\u003c\/li\u003e\n\u003cli\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtension Cable\u003c\/strong\u003e : (Tested Configuration, this kit is suitable for essentially majority of older Creality or other printers that use screw terminals for heater cartridge and the voltage and wattage is suitable)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1000mm(1m) (Ender 3\/3v2, Ender 2 Pro)\u003c\/li\u003e\n\u003cli\u003e1500mm(1.5m) (Ender 3 Max, Ender 5 Pro, CR10-Mini, Prusa Printers)\u003c\/li\u003e\n\u003cli\u003e2000mm(2m) (Ender 5 Plus)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThese heaters are more than capable of reaching temperatures that will soften aluminum blocks. These recommenced only be used with a copper block. Please also ensure firmware thermal runway safety  features is turn on and tested.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHeater specifications \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 60w\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Between batches cable extension may be red\/black\/white wiring. \u003c\/p\u003e\n\u003ch3\u003eExtensions Cable Wire Spec:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnector on module: \u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\"\u003e43645-0200\u003c\/a\u003e [Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/li\u003e\n\u003cli\u003eConnector on extension cable: \u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\"\u003e43640-0201\u003c\/a\u003e [Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/li\u003e\n\u003cli\u003eModule Connection Specs: Molex Micro Fit 3.0\u003c\/li\u003e\n\u003cli\u003eModule Connection Operating Ambient Temperature: -25°C~105°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":42420368605353,"sku":"68605353","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"1.5m","offer_id":42420368539817,"sku":"68539817","price":13.95,"currency_code":"AUD","in_stock":false},{"title":"2m","offer_id":42420368572585,"sku":"68572585","price":15.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/24v-60w-heater-cartridge-15m2m-drhotswap-hotswappable-for-3d-printers-68539817-5102528.jpg?v=1755908944"},{"product_id":"12v-40w-heater-cartridge-drhotswap-universal-3d-printer","title":"12V 40W Heater Cartridge DrHotSwap HotSwappable Universal 3D Printer","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 12cm instead of running new Heater cartridge or splicing wires.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Heater with ferrules extension wire connection to ensure reliability\u003c\/li\u003e\n\u003cli\u003eEasily to cable manage and flexible extension cable.\u003c\/li\u003e\n\u003cli\u003eQuick and low future replacement spare cost. \u003c\/li\u003e\n\u003cli\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\" data-mce-fragment=\"1\"\u003eExplore Range\u003c\/a\u003e]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtension Cable : \u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2000mm(2m) Original CR10 with 12V Power Supply, Prusa MK2 (non plus)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWe do recommended checking your power supply voltage is 12v, most newer printer is 24v.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeater Cartridge 12V 40W ONLY\u003c\/p\u003e\n\u003cp\u003eNote: Between batches cable extension may be red\/black wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"2m","offer_id":42538441113769,"sku":"41113769","price":13.5,"currency_code":"AUD","in_stock":true},{"title":"None","offer_id":42538441146537,"sku":"41146537","price":7.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/products\/12v-40w-heater-cartridge-drhotswap-hotswappable-universal-3d-printer-spares-41113769-1701829.png?v=1755908894"},{"product_id":"24v-70w-heater-cartridge-1-5m-2m-drhotswap-hotswapable-for-ender-3-5-series-3d-printers","title":"24V 70W Heater Cartridge 2M DrHotSwap HotSwappable for 3D Printers","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 14cm instead of running new heater cartridge or splicing wires.  \u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Quality Heater with ferrules wire connection to ensure reliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasily to manage and flexible extension cable.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eQuick and low future replacement spare cost\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eExtension Cable : \u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2000mm(2m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan size=\"4\" data-mce-fragment=\"1\" rwr=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThese heaters are more than capable of reaching temperatures that will soften aluminum blocks. These recommenced only be used with a copper block. Please also ensure firmware thermal runway safety  features is turn on and tested.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeater specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 70w \/ 70watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(Ensure your have enough peak current\/power from your mainboard MOSFET and power supply)\u003c\/p\u003e\n\u003cp\u003eNote: Between batches cable extension may be red\/black wiring.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConnector on module:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\" data-mce-href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\"\u003e43645-0200\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConnector on extension cable:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\" data-mce-href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\"\u003e43640-0201\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\" data-mce-fragment=\"1\" rwr=\"1\"\u003eOEM: Trianglelabs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"4\" data-mce-fragment=\"1\" rwr=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":42915658694825,"sku":"58694825","price":10.5,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":42915658760361,"sku":"58760361","price":16.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/24v-70w-heater-cartridge-2m-drhotswap-hotswappable-for-3d-printers-58760361-1839441.jpg?v=1755908628"},{"product_id":"24v-120w-heater-cartridge-0-2-2m-drhotswap","title":"24V 120W Heater Cartridge 0.2\/2M DrHotSwap HotSwappable for 3D Printers","description":"\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 12cm instead of running new heater cartridge or splicing wires.  \u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Quality Heater with ferrules wire extension connection to ensure reliability\u003c\/li\u003e\n\u003cli\u003eEasily to manage and flexible extension cable.\u003c\/li\u003e\n\u003cli\u003eQuick and low future replacement spare cost\u003c\/li\u003e\n\u003cli\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\"\u003eExplore Range\u003c\/a\u003e]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: none\/bare wire are ~17cm long\u003c\/p\u003e\n\u003ch3\u003eExtension Cable :\u003c\/h3\u003e\n\u003cp\u003e(Tested Configuration, this kit is suitable for essentially majority of Creality and other printers that use screw terminals for heater cartridge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2000mm(2m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeater module specifications \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 120w \/ 120watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eEnsure your have enough peak current\/power from your main board MOSFET and power supply, or you may need restrict max power draw within klipper or marlin. Ensure thermal runaway is configured and tested. \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThese heaters are more than capable of reaching temperatures that will soften aluminum blocks. These recommenced only be used with a copper block. Please also ensure firmware thermal runway safety  features is turn on and tested.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Between batches cable extension may be red\/black wiring. \u003c\/p\u003e\n\u003cp\u003eNote: None (Bare Wire) does not contain molex connector for quick connection. \u003c\/p\u003e\n\u003cp\u003eOEM: DREMC\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":43186797871273,"sku":"97871273","price":15.45,"currency_code":"AUD","in_stock":false},{"title":"None (Bare Wire)","offer_id":45626515456169,"sku":"15456169","price":15.45,"currency_code":"AUD","in_stock":false},{"title":"2m","offer_id":43186797936809,"sku":"97936809","price":24.45,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/24v-120w-heater-cartridge-022m-drhotswap-hotswappable-for-3d-printers-97936809-3688295.jpg?v=1755908333"},{"product_id":"drhotswap-thermistor-heater-pcb-for-canbus-boards","title":"DrHotSwap Thermistor\/Heater PCB for Toolhead Breakouts","description":"\u003cp\u003eThe DRHOTSWAP Thermistor\/Heater PCB is the perfect solution for CanBus boards and toolhead breakouts. Featuring plug and play for most PCB breakout boards such as LDO Voron SB\/AB  PCB, ensures reliable temperature control and superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eDo Note: \u003c\/strong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis is not compatible with existing hotswap using molex quick connectors\u003cstrong\u003e.\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHeater module specifications \u003c\/h3\u003e\n\u003ch4\u003e24V 60 watts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 60 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e24V 50 watts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 50 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThermistor module specifications \u003c\/h3\u003e\n\u003ch4\u003e104NT-4 Semitec\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThermistor Length: 15mm\u003c\/li\u003e\n\u003cli\u003eThermeristor diameter: 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThermistor temperature range: -50 c - 300 c\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePT1000\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThermistor Length: 15mm\u003c\/li\u003e\n\u003cli\u003eThermeristor diameter: 3mm\u003c\/li\u003e\n\u003cli\u003eThermistor temperature range: -50 c - 450 c\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eSince the PCB may be installed in various orientations on a toolhead, verify that your wiring length suits your configuration. This PCB has been tested and confirmed compatible with the Voron Afterburner\/Stealthburner setups using BTT SB\/LDO two-part PCB, afterburner PCB, and Dirtybird Roadkill Long PCB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware\u003c\/h3\u003e\n\u003ch4\u003e104nt\/104gt Firmware Setup:\u003c\/h4\u003e\n\u003cdiv\u003e\u003cstrong\u003eMarlin Firmware Configuration:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i5.33a4598cPEhKi6\" align=\"start\"\u003e* 5 : 100K thermistor - ATC Semitec 104GT-2\/104NT-4-R025H42G(Used in ParCan \u0026amp; J-Head) (4.7k pullup)\u003c\/p\u003e\n\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i4.33a4598cPEhKi6\" align=\"start\"\u003e#define TEMP_SENSOR_0 5\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cstrong\u003eRepetier:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003eATC Semitec 104GT-2\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cstrong\u003eKlipper documentation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003esensor_type: ATC Semitec 104NT-4-R025H42G\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cstrong\u003eDuet 3D:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003eM305 P1 T100000 B4658 C6.5338987554e-08\u003c\/p\u003e\n\u003cp align=\"start\"\u003ehttps:\/\/forum.duet3d.com\/topic\/7605\/semitec-104nt-4r025h42g-solved\/8\u003c\/p\u003e\n\u003cp align=\"start\"\u003e \u003c\/p\u003e\n\u003cp align=\"start\"\u003ePT1000 Firmware Setup:\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cstrong\u003eMarlin Firmware Configuration:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eConnect directly to the thermal interface of the control board and then determine which one to choose according to the pull-up resistor of the interface. In most cases it is 4.7K ohms, please check your motherboard manual for details.\u003cbr\u003e\u003cbr\u003e* 1010 : Pt1000 with 1kΩ pullup\u003cbr\u003e\u003cbr\u003e* 1022 : Pt1000 with 2.2kΩ pullup\u003cbr\u003e\u003cbr\u003e* 1047 : Pt1000 with 4.7kΩ pullup\u003cbr\u003e\u003cbr\u003ehttps:\/\/marlinfw.org\/docs\/configuration\/configuration.html#thermal-settings\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKlipper documentation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDirectly connected PT1000 sensor. The following parameters are available in heater sections that use one of these sensors.\u003cbr\u003e\u003cbr\u003esensor_type: PT1000\u003cbr\u003e\u003cbr\u003esensor_pin:\u003cbr\u003e\u003cbr\u003e# Analog input pin connected to the sensor. This parameter must be\u003cbr\u003e\u003cbr\u003e# provided.\u003cbr\u003e\u003cbr\u003e#pullup_resistor: 4700\u003cbr\u003e\u003cbr\u003e# The resistance (in ohms) of the pullup attached to the sensor. The\u003cbr\u003e\u003cbr\u003e# default is 4700 ohms.\u003cbr\u003e\u003cbr\u003ehttps:\/\/www.klipper3d.org\/Config_Reference.html.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDuet 3D:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ehttps:\/\/docs.duet3d.com\/en\/User_manual\/Connecting_hardware\/Temperature_connecting_thermistors_PT1000\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DREMC","offers":[{"title":"24v 60w Heater","offer_id":43333152309417,"sku":"DR-PHH2460","price":14.45,"currency_code":"AUD","in_stock":false},{"title":"24v 50w Heater","offer_id":43556460822697,"sku":"DR-PHH2450","price":13.45,"currency_code":"AUD","in_stock":true},{"title":"104NT Cartridge Thermistor","offer_id":43333152342185,"sku":"DR-PHT104","price":8.45,"currency_code":"AUD","in_stock":true},{"title":"PT1000 Cartridge Thermistor","offer_id":43333184651433,"sku":"DR-PHTPT1000","price":17.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/drhotswap-thermistorheater-pcb-for-toolhead-breakouts-dr-phh2460-6607466.jpg?v=1755908189"},{"product_id":"24v-70w-90-heater-cartridge-2m-drhotswap-for-3d-printers","title":"24V 70W 90° Heater Cartridge 2M DrHotSwap HotSwappable for 3D Printers","description":"\u003cp\u003e90 Degrees high power 70w 24v heater prefer for horizontal mounted heater block for improved strain relief. \u003c\/p\u003e\n\u003cp\u003eAre you always replacing your Heater Cartridge and want reduce down time on your printers? This is cost effective method where you only replace the shorter 14cm instead of running new heater cartridge or splicing wires.  \u003c\/p\u003e\n\u003ch3\u003eFeatures: \u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh quality Heater with ferrules wire connection to ensure reliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e90 degree angle heater for less cable strain (may not suitable for all hotend setup, please double check your hotend and how heater is mounted. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasily to manage and flexible extension cable.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eQuick and low future replacement spare cost\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbility to switch to higher or lower wattage heater for different hotend. [\u003ca href=\"https:\/\/store.dremc.com.au\/collections\/drhotswap\" data-mce-fragment=\"1\"\u003eExplore Range\u003c\/a\u003e]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtension Cable : \u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2000mm(2m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThese heaters are more than capable of reaching temperatures that will soften aluminum blocks. These recommenced only be used with a copper block. Please also ensure firmware thermal runway safety  features is turn on and tested.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHeater specifications \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater Length: 20mm\u003c\/li\u003e\n\u003cli\u003eHeater Material: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHeater Diameter: 6mm\u003c\/li\u003e\n\u003cli\u003eVoltage 24v DC\u003c\/li\u003e\n\u003cli\u003ePower: 70w \/ 70watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(Ensure your have enough peak current\/power from your mainboard MOSFET and power supply)\u003c\/p\u003e\n\u003cp\u003eNote: Between batches cable extension may be red\/black wiring.\u003c\/p\u003e\n\u003cp\u003eConnector on module: \u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-receptacle-2-pin-sold-individually\"\u003e43645-0200\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConnector on extension cable: \u003ca href=\"https:\/\/store.dremc.com.au\/products\/molex-microfit-3-0-connector-2-pin-sold-individually\"\u003e43640-0201\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003e[Molex Branded Quick Connectors, Micro Fit 3.0]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOEM: Trianglelabs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"None","offer_id":44203902533801,"sku":"02533801","price":16.5,"currency_code":"AUD","in_stock":true},{"title":"2m","offer_id":44203902566569,"sku":"02566569","price":19.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/24v-70w-900-heater-cartridge-2m-drhotswap-hotswappable-for-3d-printers-02533801-9072408.jpg?v=1755907660"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/collections\/drhotswap-1520818.jpg?v=1755906675","url":"https:\/\/store.dremc.com.au\/en-us\/collections\/drhotswap-heater-thermistor-hotswap.oembed","provider":"DREMC STORE 3D Printing Supplies","version":"1.0","type":"link"}