{"title":"PA \/ Nylon Filament","description":"\u003cp\u003eWhen evaluating high-performance filaments for demanding applications, it's essential to consider materials that offer exceptional strength, durability, and resistance to environmental challenges. \u003cstrong\u003ePA\/Nylon\u003c\/strong\u003e filament stands out as a top choice, renowned for its exceptional strength, some flexibility, and durability, making it suitable for various applications that demand high performance. This material exhibits excellent resistance to wear, high temperatures, and most oils and greases, ensuring your prints withstand the rigors of mechanical stress and environmental challenges.\u003c\/p\u003e\n\u003ch3\u003eKey Features of PA\/Nylon Filament\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Strength and Flexibility:\u003c\/strong\u003e PA\/Nylon is designed to handle stress and strain without compromising on flexibility. This characteristic makes it suitable for components that must endure dynamic loads and repeated use. Annealing or coating may be required for some blends such as PA6 as those are moisture prone and can creep under load when to annealed. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWear Resistance:\u003c\/strong\u003e The inherent toughness of Nylon makes it resistant to abrasion, ideal for mechanical parts that encounter friction and wear over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Resistance:\u003c\/strong\u003e With the ability to maintain performance in high-temperature environments, PA\/Nylon is perfect for applications where thermal stability is essential. Its recommended to annealing nylon for better temperature performance or opt for PPS or PPA which as better stability straight from the a print but annealing will improve nylon stiffness and temperature resistant. . \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecialty Blends\u003c\/h3\u003e\n\u003cp\u003eAt \u003cstrong\u003eDREMC\u003c\/strong\u003e, we offer a diverse range of PA\/Nylon blends to cater to specific needs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGF (Glass Fiber) Blend:\u003c\/strong\u003e This blend enhances the mechanical properties of standard Nylon, providing increased rigidity and strength. It's perfect for printing complex geometries that require added load-bearing capabilities.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCF (Carbon Fiber) Blend:\u003c\/strong\u003e Combining Nylon with carbon fibers results in an ultra-strong and lightweight filament. This blend is ideal for applications requiring high performance with minimized weight, such as automotive and aerospace components and improve weatberablity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePopular PA12:\u003c\/strong\u003e Known for its balance of strength and flexibility, this versatile blend is suitable for a wide array of applications, from functional prototypes to end-use parts. Less prone to moistures but slighty less temperature resistant. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePPS\/PPA Blends:\u003c\/strong\u003e This blend offers exceptional thermal stability and chemical resistance, making it ideal for specialised applications in harsh environments but require higher industrial printing requirements (300+c Nozzle and Active Chamber) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\u003cp\u003eOur PA\/Nylon filament is suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Components:\u003c\/strong\u003e Create durable gear systems, bearing housings, and other parts that require resilience and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJigs and Fixtures:\u003c\/strong\u003e Design custom tools that can handle repeated use without wear or failure. (Some materials will require annealing to be used in static medium\/long term loads) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-Use Applications:\u003c\/strong\u003e Reliable parts that meet industry standards for functionality and performance across various sectors, including automotive, aerospace, and manufacturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAre you feeling overwhelmed by choices? Need assistance selecting the best materials for your next project or product? \u003ca href=\"https:\/\/store.dremc.com.au\/pages\/contact-us\" title=\"Contact DREMC\"\u003eReach out to us\u003c\/a\u003e! We’re happy to recommend the most suitable materials to meet your specific needs and ensure your project’s success. Feel free to contact us for personalised suggestions!\u003c\/p\u003e","products":[{"product_id":"polymaker-polymide-nylon-copa-black-750g-1","title":"Polymaker PolyMide Nylon CoPA Black 750g","description":"\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cimg alt=\"PolyMide CoPA Nylon Filament\" src=\"https:\/\/www.3dprintingsolutions.com.au\/Portals\/1\/Images\/Filaments\/Polymaker\/Products\/PolyMide%20CoPA\/PolyMide-CoPA-Action-Photo-2021.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.3dprintingsolutions.com.au\/Portals\/1\/Images\/Filaments\/Polymaker\/Products\/PolyMide%20CoPA\/PolyMide-CoPA-Action-Photo-2021.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePolyMide™ is a family of Nylon\/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.\u003c\/p\u003e\n\u003cdiv class=\"col-md-12 col-md-offset-2\" data-mce-fragment=\"1\" relative=\"\" position:=\"\"\u003e\n\u003cdiv class=\"col-md-6 col-md-offset-1\" data-mce-fragment=\"1\" position:=\"\" relative=\"\"\u003e\n\u003cdiv class=\"responsive-video\" style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o2yh_tZ93PM\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/o2yh_tZ93PM\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u0026lt;!--cke_bookmark_459S--\u0026gt;\u0026lt;!--cke_bookmark_459E--\u0026gt;\u0026lt;!--cke_bookmark_457S--\u0026gt;\u0026lt;!--cke_bookmark_457E--\u0026gt;\u0026lt;!--cke_bookmark_1392S--\u0026gt;\u0026lt;!--cke_bookmark_1392E--\u0026gt;\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003ePolyMide™ CoPA features Warp-free technology\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarp-Free™ - \u003c\/strong\u003eWarp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The Warp-Free™ technology in PolyMide™ CoPA is designed to work best with minimal bed temperatures.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eClick the 'Quality \u0026amp; Technologies' tab to learn more about this technology.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cimg alt=\"Polymaker PolyMide CoPA\" src=\"https:\/\/www.3dprintingsolutions.com.au\/Portals\/1\/Images\/Filaments\/Polymaker\/Products\/PolyMide%20CoPA\/PolyMide-CoPA-Technologies.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.3dprintingsolutions.com.au\/Portals\/1\/Images\/Filaments\/Polymaker\/Products\/PolyMide%20CoPA\/PolyMide-CoPA-Technologies.png\"\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003eFeatures\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eExcellent Toughness - \u003c\/strong\u003eThe outstanding mechanical strength and toughness makes PolyMide™ CoPA an excellent choice for engineering based applications.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eExcellent Heat Resistance - \u003c\/strong\u003eWith a high softening temperature of up to 180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials on the market.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eImproved Printability – \u003c\/strong\u003eUnlike many other Nylon filaments, PolyMide™ CoPA is extremely easy to work with, exhibiting excellent dimensional stability when compared to other nylon filaments. It is compatible with most filament-based 3D printers with no heated bed or chamber required! \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOil \u0026amp; Wear Resistance - \u003c\/strong\u003eParts printed in PolyMide™ CoPA display excellent abrasion resistance and excellent resistance to oils and great.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUncompromised Quality - \u003c\/strong\u003ePolymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.\u003c\/p\u003e\n\u003cbr\u003e\u003chr\u003e\n\u003ch5 style=\"text-align: center;\"\u003eIndustry Leading Quality Control\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/www.3dprintingsolutions.com.au\/Portals\/1\/Images\/Filaments\/Polymaker\/Manufacturing-Polymaker-Factory-Banner.jpg\" alt=\"Polymaker 3D Printing Filament\"\u003e\u003c\/p\u003e\n\u003cp\u003ePolyMide™ CoPA like all other Polymaker materials is manufactured using state-of-the-art polymer processing technologies and equipment. Polymakers rigorous quality control process ensures industrial standards of reliability for a consistent customer experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTolerance:\u003c\/strong\u003e Polymakers custom developed extrusion, control and monitoring solutions ensure filament tolerance and roundness meet Polymakers strict quality standards.\u003cbr\u003e \u003cstrong\u003eReliable Mechanical, Colouring \u0026amp; Printing Properties: \u003c\/strong\u003eEvery batch of filament products are tested to ensure all quality specs (melt flow, softening point, mechanical, diameter, round-ness) are met.\u003cbr\u003e \u003cstrong\u003eDrying \u0026amp; Vacuum Sealing:\u003c\/strong\u003e Before packaging, PolyMide™ CoPA is dried to a moisture level \u0026lt;0.05w%  to ensure the best printing quality and filaments are vacuum sealed to protect the filament from moisture. All vacuum packaged products are left for 24 hours before boxing to ensure they are leak-free.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5 style=\"text-align: center;\"\u003ePackaging\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent Spool: \u003c\/strong\u003ePolyMide™ CoPA is wound on Polymakers 750g transparent spools. With the transparent spool, it is easy to see exactly how much filament is left for your next printing project.\u003cbr\u003e \u003cstrong\u003eResealable Aluminium Foil Bag: \u003c\/strong\u003ePolyMide™ CoPA is packaged in a vacuum sealed aluminium foil resealable bag to ensure your filament is moisture free. Like all other Nylon based filaments, PolyMide™ CoPA is hygroscopic so we recommend keeping this bag for filament storage. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrint Settings Suggestion: \u003ca href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000302926-polymaker-polymide-nylon-copa\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000302926-polymaker-polymide-nylon-copa\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003chr\u003e\n\u003ch5 style=\"text-align: center;\"\u003eSpecification\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 500px;\" cellspacing=\"1\" cellpadding=\"1\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.12 g\/cm3 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTechnologies\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarp-Free™ Technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch5 style=\"text-align: center;\"\u003eTechnical Data \u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eWe have full \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PolyMide_CoPA_SDS_US_EN_V1.pdf?v=1640833078\" target=\"_blank\"\u003esafety data sheets\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PolyMide_CoPA_TDS_V5.2.pdf?v=1640828798\" target=\"_blank\"\u003etechnical data\u003c\/a\u003e sheets for PolyMide™ CoPA and all other Polymaker products.\u003c\/p\u003e\n\u003cp\u003eThe typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5 style=\"text-align: center;\"\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003ePolyMide™ CoPA has been engineered so users can print tough Nylon parts with superior flatness and reliability.\u003c\/p\u003e\n\u003cp\u003eOf course with thousands of unique 3d printer models on the market, we can't guarantee each filament type will work with every 3D printer.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":42042248560809,"sku":"PG05001","price":94.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/products\/polymaker-polymide-nylon-copa-black-750g-pg05001-1150150.png?v=1755909298"},{"product_id":"polymaker-fiberon-pa612-cf15-nylon-500g-1-75mm-aka-polymide","title":"Polymaker Fiberon PA612-CF15 Nylon 500g 1.75mm (aka PolyMide)","description":"\u003cp\u003eIndustrial carbon-fiber reinforced Nylon 612 combines the mechanical performance and low-cost of Nylon 6 with the low moisture sensitivity of Nylon 12.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon-fiber reinforced Nylon 6 and Nylon 12-blend combines better mechanical performance than PA12 with lower moisture sensitivity than PA6.\u003c\/li\u003e\n\u003cli\u003eReinforced with 15% chopped fibers delivering excellent stiffness and high strength to weight ratio.\u003c\/li\u003e\n\u003cli\u003eThe best strength and stiffness among Polymaker Nylon products in \"wet state\".\u003c\/li\u003e\n\u003cli\u003eHigh heat resistance up to 175°C HDT (0.45 MPa) after annealing.\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability during printing.\u003c\/li\u003e\n\u003cli\u003eCardboard spool \u0026amp; packaging (made from 100% recycled cardboard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/PA612-CF-PolyMide-Fiberon-Transition-Banner.jpg?v=1746052845\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"lead\"\u003ePolyMide PA612-CF has transitioned to Polymakers Fiberon range and is now sold as Fiberon PA612-CF15 (same product, new name and packaging)\u003c\/p\u003e\n\u003cp\u003eFiberon™ is polymakers family of fiber-reinforced composite filaments developed to provide outstanding mechanical performance for a range of engineering applications.\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA612-CF15 is a carbon fiber reinforced nylon filament based on a copolymer of Nylon 6 and Nylon 12. Featuring 15% chopped carbon fibers by weight, this filament has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. Together with Polymaker's Warp-Free™ and Fiber-Adhesion™ technology, Fiberon™ PA612-CF15 offers an optimal balance by combining the advantages of both PA6 and PA12 with optimized fiber reinforcement to deliver a high-performance filament with outstanding potential for industrial engineering, tooling, automotive, and end-use applications.\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhy choose PA612-CF15\u003c\/h2\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-10\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest of PA6 and PA12 - \u003c\/strong\u003eFiberon™ PA612-CF15 is a copolymer combining PA6 and PA12 with 15% chopper carbon fiber to deliver high stiffness, tensile strength and heat resistance with lower moisture sensitivity. Fiberon™ PA612-CF15 offers the best middle ground between PA6 and PA12 and is a great-all-rounder for real-world applications that require the higher mechanical performance and affordability of short-chain nylon (PA6) with the reduced moisture sensitivity of long-chain nylon (PA12).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Moisture Sensitivity - \u003c\/strong\u003eIn most applications nylon parts absorb moisture from the air. The water molecule increases toughness and durability of the nylon while reducing strength and stiffness. PA6 is more susceptible to absorbing moisture than PA12 and as a result the mechanical properties of PA6 are effected in some application environments. Fiberon™ PA612-CF15 is less hygroscopic than PA6-CF making it an ideal and cost-effective alternative to Fiberon™ PA6-CF20 for parts which may be subject to high humidity. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Heat Resistance - \u003c\/strong\u003eFeaturing a high heat resistance after annealing\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e, Fiberon™ PA612-CF15 offers excellent heat resistance for demanding applications where heat and stress are critical design factors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutstanding Layer Adhesion - \u003c\/strong\u003eMost fiber reinforced materials show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymakers Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. The implementation of this technology in Fiberon™ PA612-CF15 not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarp-Free™ - \u003c\/strong\u003eWarp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The Warp-Free™ technology in Fiberon™ PA612-CF15 is designed to work best with minimal bed temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Printability – \u003c\/strong\u003eUnlike many other brands of Nylon filament, Fiberon™ PA612-CF15 is extremely easy to work with, exhibiting excellent dimensional stability during printing. It is compatible with most filament-based 3D printers capable of reaching 260°C nozzle temperature and no heated bed or chamber is required!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncompromised Quality - \u003c\/strong\u003ePolymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"col-sm-1\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e Fiberon™ PA612-CF15\u003cem\u003e displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. \u003c\/em\u003eFiberon™ PA612-CF15\u003cem\u003e can be annealed in the oven at 100˚C for 16 hours right after the printing process.\u003c\/em\u003e\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":43726542471337,"sku":"FG07001","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/polymaker-fiberon-pa612-cf15-nylon-500g-175mm-aka-polymide-fg07001-2356514.png?v=1755907972"},{"product_id":"dremc-pa6-cf-filament-1-75mm-1kg","title":"DREMC PA6 CF Filament 1.75mm 1kg","description":"\u003cdiv\u003e\n\u003cp\u003eDREMC PA6 CF Filament 1.75mm 1kg combines the strength and durability of polyamide 6 from LUVOCOM with carbon fibre reinforcement, delivering exceptional mechanical performance. Ideal for parts exposed to moderate heat and vibration environment such as jigs and fixtures.\u003c\/p\u003e\n\u003ch3\u003eMaterials Features\/Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLUVOCOM® PA6 with added Carbon Fibre (contain chopped CF \u0026lt;15%)\u003c\/li\u003e\n\u003cli\u003eTemperature resistant up to 140 °C (50% retain \u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003eproperties for \u003c\/span\u003e100,000 hours)\u003c\/li\u003e\n\u003cli\u003eGood electrical properties\u003c\/li\u003e\n\u003cli\u003e3D prints with high dimensional accuracy and increased layer adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eMaterials\/Spool\/Packaging Information: \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCardboard spool and packaging\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum sealed bag with an additional re-usable mylar bag\u003c\/li\u003e\n\u003cli\u003eHighly sensitive to moisture and require enclosure and its recommended annealing parts after printing for better strength under constant load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm (+\/- 0.05mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1KG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e:  1.25g\/cm3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEmpty Cardboard Spool: \u003c\/strong\u003e~145g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003ePrinting Settings\u003c\/h3\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/store.dremc.com.au\/search?sort_by=relevance\u0026amp;q=harden+steel\u0026amp;type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;filter.v.price.gte=\u0026amp;filter.v.price.lte=\u0026amp;filter.p.product_type=Nozzle\" title=\"DREMC Hardened Steel Nozzles\" target=\"_blank\"\u003e\u003cspan\u003ewear resistant \u003c\/span\u003enozzle\u003c\/a\u003e must be used, carbon fiber material is abrasive and will wear standard brass nozzles and \u0026gt;0.5mm nozzle is recommended.\u003c\/p\u003e\n\u003cp\u003eNylon is highly sensitive to moisture, we recommended a proper dryer and dry before and during printing, some older dryer without fans and exhaust outlet or cannot reach high enough temperature will not dry nylon thoroughly. You need a dryer that can reach at least 60\u003cspan class=\"fr-view collab-annotatable\" data-test-id=\"article-description\" id=\"article_description\"\u003e°\u003c\/span\u003ec+, we recommend using filament clamp when drying above 70c to avoid spool splitting due to glue adhesive or avoid dryer with heater element is at core (Eibos X Dryer). We also recommended you ensure you store filament well during storage and re-dry before use. \u003c\/p\u003e\n\u003cp\u003eFor best results, dry filament using a filament drier before use or print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium\/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] \u003ca href=\"https:\/\/support.dremc.com.au\/support\/solutions\/articles\/51000292935-filament-drying-time-recommendation\" title=\"3D Printing Drying Guide\"\u003eFilament Drying Guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint Profile Example: \u003c\/span\u003e\u003ca title=\"DREMC Filament 3D Printing Profile\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAvoid printing from AMS for better reliability, print from dry box or dryer, see above printing specific tips. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBrittle Materials Guide: \u003ca href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000492353-print-tip-brittle-materials-carbon-fibre-glass-fibre-sparkle-glow-in-dark-\" title=\"Print Tip: Brittle Materials (Carbon Fibre\/Glass Fibre\/Sparkle\/Glow in Dark)\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000492353-print-tip-brittle-materials-carbon-fibre-glass-fibre-sparkle-glow-in-dark-\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-sm\" style=\"font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eNozzle Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e260°C - 290°C (~280\u003cspan\u003e°C\u003c\/span\u003e \u0026amp; Low\/no part cooling is recommended for strength parts)*\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Plate Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e60°C - 90°C\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Material\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eWorks well with most common build surfaces. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/pei-build-plate\" target=\"_blank\"\u003ePEI Build Plate\u003c\/a\u003e (Texture suitable), smooth PEI with PVA\/Bed Adhesive such as \u003ca href=\"https:\/\/store.dremc.com.au\/products\/magigoo-pa-3d-printing-adhesive-for-polyamide-nylon-50ml\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e. \u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Treatment\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eTypically none required. Some surfaces such as glass work best with PVA glue stick or \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/magigoo\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eCooling Fan\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eLOW-MEDIUM for better surface quality\u003cbr\u003eOFF-LOW (\u0026lt;10%) for better strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eEnclosure \/ Heater Chambers\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e\n\u003cp\u003eRecommended for complex larger geometries. \u003cbr\u003e50-90˚C+ may be required for higher density and larger geometries.\u003c\/p\u003e\n\u003cp\u003eRecommend VOC\/Air Filtering or print in well ventilated room\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e30 mm\/s - 150 mm\/s \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eRetraction\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eThe ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help.\u003cbr\u003eDirect Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm\/s\u003cbr\u003eBowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eDrying Recommendation \u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e~70\u003cspan class=\"fr-view collab-annotatable\" data-test-id=\"article-description\" id=\"article_description\"\u003e°\u003c\/span\u003ec for 8-12hr (Only dry if filament is wet, over drying\/repeat drying can damage filament)\u003ca href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000342355-dremc-filament-snap-on-addon\"\u003e REQUIRE PRINTED CLAMP WHEN DRYING\u003c\/a\u003e (\u003ca title=\"Filament Drying Guide\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000292935-filament-drying-time-recommendation\"\u003eFilament Dryer Guide\u003c\/a\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eStorage\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eKeeping filament in an airtight container or provided Mylar bag with new\/dried \u003cspan\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/filament-drying-desiccant\" title=\"Slice Engineering Filament Drying Desiccant\"\u003edesiccant\u003c\/a\u003e. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 206px;\" scope=\"row\"\u003e\u003cspan\u003eSupport Material\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eSingle Extrusion:\u003cbr\u003eSelf Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Due to the low co-efficient of friction please ensure you have smooth filament path from filament box\/dryer. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/products\/3m-ptfe-reverse-bowden-tubing-3mm-x-4mm?_pos=5\u0026amp;_sid=2b9f61407\u0026amp;_ss=r\" title=\"PTFE 3x4mm\"\u003e3x4mm PTFE\u003c\/a\u003e to be used for reverse bowden.  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBased on 0.5\/0.6 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* As always you should do temperature to tower as each machine printing temperature may vary depending on hotend\/printing speed etc. (Test Sample on Dragon HF 0.5mm Gamma Master with VZ Extruder)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003eSample print STL : \u003ca rel=\"noopener\" href=\"https:\/\/www.printables.com\/model\/351504\" target=\"_blank\"\u003ehttps:\/\/www.printables.com\/model\/351504, \u003c\/a\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:1984879\" rel=\"noopener\" aria-describedby=\"a11y-new-window-message\" target=\"_blank\"\u003ehttps:\/\/www.thingiverse.com\/thing:1984879\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.printables.com\/model\/351504\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/em\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:1984879\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSpool Size:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpool Diameter: 198mm (+\/-1mm)\u003c\/li\u003e\n\u003cli\u003eSpool Hub Diameter: 53mm (+\/-1mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpool Width: 65mm (+\/-4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRe-Order Number: 1946203\u003c\/h4\u003e","brand":"DREMC","offers":[{"title":"Black","offer_id":43756196102313,"sku":"DR-PA6-CF","price":66.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/dremc-pa6-cf-filament-175mm-1kg-dr-pa6-cf-1568196.jpg?v=1755907968"},{"product_id":"dremc-ppa-cf-carbon-fibre-filament-1-75mm-1kg","title":"DREMC PPA CF Carbon Fibre Filament 1.75mm 1kg","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003ePPA CF is a 3D printing material that blends polyphthalamide (PPA) with \u0026lt;15% carbon fiber (CF). It boasts exceptional mechanical strength, rigidity, and antistatic properties, as well as a high heat deflection temperature. This filament is perfect for industrial applications that demand durability and strength, particularly in high-temperature settings, as it demonstrates superior high-temperature creep resistance over prolonged periods.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eMaterials Features\/Applications:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality LUVOCOM® PPA-CF (contain chopped CF \u0026lt;15%)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eMaterials\/Spool\/Packaging Information: \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic spool and packaging\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum sealed bag with an additional re-usable mylar bag\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm (+\/- 0.05mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1KG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.23 g\/cm3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEmpty Plastic Spool: \u003c\/strong\u003e~140g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"DREMC Hardened Steel Nozzles\" href=\"https:\/\/store.dremc.com.au\/search?sort_by=relevance\u0026amp;q=harden+steel\u0026amp;type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;filter.v.price.gte=\u0026amp;filter.v.price.lte=\u0026amp;filter.p.product_type=Nozzle\" target=\"_blank\"\u003eAbrasive resistance nozzle\u003c\/a\u003e is requirement due to carbon fibre, plated\/brass nozzle can wear quickly and cause inconsistent prints and will destroy those types of nozzles. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003ePrinting Settings\/Requirements\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/store.dremc.com.au\/search?sort_by=relevance\u0026amp;q=harden+steel\u0026amp;type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;filter.v.price.gte=\u0026amp;filter.v.price.lte=\u0026amp;filter.p.product_type=Nozzle\" title=\"DREMC Hardened Steel Nozzles\" target=\"_blank\"\u003e\u003cspan\u003ewear resistant \u003c\/span\u003enozzle\u003c\/a\u003e must be used, carbon fiber material is abrasive and will wear standard brass nozzles and \u0026gt;0.5mm nozzle is recommended.\u003c\/p\u003e\n\u003cp\u003eFor best results, dry filament using a filament drier before use and print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium\/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] \u003ca href=\"https:\/\/support.dremc.com.au\/support\/solutions\/articles\/51000292935-filament-drying-time-recommendation\" title=\"3D Printing Drying Guide\"\u003eFilament Drying Guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint Profile Example: \u003c\/span\u003e\u003ca title=\"DREMC Filament 3D Printing Profile\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-sm\" style=\"font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eNozzle Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e260°C - 320°C \u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Plate Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e70°C - 100°C\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Material\u003c\/th\u003e\n\u003ctd colspan=\"1\" style=\"width: 693px;\"\u003eWorks well with most common build surfaces. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/pei-build-plate\" target=\"_blank\"\u003ePEI Build Plate\u003c\/a\u003e (Texture suitable), smooth PEI with PVA\/Bed Adhesive such as \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/magigoo\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e. \u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Treatment\u003c\/th\u003e\n\u003ctd colspan=\"1\" style=\"width: 693px;\"\u003eTypically none required. Some surfaces such as glass work best with PVA glue stick or \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/magigoo\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eCooling Fan\u003c\/th\u003e\n\u003ctd colspan=\"1\" style=\"width: 693px;\"\u003eLOW-MEDIUM for better surface quality\u003cbr\u003eOFF-LOW (\u0026lt;10%) for better strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eEnclosure \/ Heater Chambers\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e\n\u003cp\u003eRecommended for complex larger geometries. \u003cbr\u003e50-90˚C+ may be required for higher density and larger geometries.\u003c\/p\u003e\n\u003cp\u003eRecommend VOC\/Air Filtering\/fume extraction or print in well ventilated room with fume extraction. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd colspan=\"1\" style=\"width: 693px;\"\u003e40 mm\/s - 150 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eRetraction\u003c\/th\u003e\n\u003ctd colspan=\"1\" style=\"width: 693px;\"\u003eThe ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help.\u003cbr\u003eDirect Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm\/s\u003cbr\u003eBowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eDrying Recommendation \u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e~80\u003cspan class=\"fr-view collab-annotatable\" data-test-id=\"article-description\" id=\"article_description\"\u003e°\u003c\/span\u003ec for 8-12hr (Only dry if filament is wet, over drying\/repeat drying can damage filament)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eStorage\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eKeeping filament in an airtight container or provided Mylar bag with new\/dried \u003cspan\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/filament-drying-desiccant\" title=\"Slice Engineering Filament Drying Desiccant\"\u003edesiccant\u003c\/a\u003e. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Due to the low co-efficient of friction please ensure you have smooth filament path from filament box\/dryer. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/products\/3m-ptfe-reverse-bowden-tubing-3mm-x-4mm?_pos=5\u0026amp;_sid=2b9f61407\u0026amp;_ss=r\" title=\"PTFE 3x4mm\"\u003e3x4mm PTFE\u003c\/a\u003e to be used for reverse bowden.  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBased on 0.5\/0.6 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* As always you should do temperature to tower as each machine printing temperature may vary depending on hotend\/printing speed etc. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpool Size:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpool Diameter: 200mm (+\/-1mm)\u003c\/li\u003e\n\u003cli\u003eSpool Hub Diameter: 53mm (+\/-1mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpool Width: 66mm (+\/-1mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRestock No. 17203241\u003cbr\u003e\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"Black","offer_id":44683907203241,"sku":"DR-PPA-CF","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/dremc-ppa-cf-carbon-fibre-filament-175mm-1kg-dr-ppa-cf-8882016.png?v=1755907380"},{"product_id":"dremc-pa12-cf-filament-1-75mm-1kg","title":"DREMC PA12 CF Filament 1.75mm 1kg","description":"\u003cdiv\u003e\n\u003cp\u003eDREMC PA12 CF Filament 1.75mm 1kg offers a high-performance blend of polyamide 12 reinforced with carbon fibre, delivering superior strength, toughness, and chemical resistance. This filament is engineered for precision and durability, ideal for demanding industrial applications and functional prototypes. Its low moisture absorption and excellent dimensional stability ensure consistent printing results. Less sensitive moisture sensitive compare to \u003ca rel=\"noopener\" title=\"DREMC PA6-CF Filament\" href=\"https:\/\/store.dremc.com.au\/products\/dremc-pa6-cf-filament-1-75mm-1kg\" target=\"_blank\"\u003ePA6 CF\u003c\/a\u003e or PA66. \u003c\/p\u003e\n\u003ch3\u003eMaterials Features\/Applications:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLUVOCOM® PA12 with added Carbon Fibre (contain chopped CF \u0026lt;10%)\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability during printing.\u003c\/li\u003e\n\u003cli\u003eHigh stiffness and mechanical performance with lower moisture sensitivity than PA6 or PA612\u003c\/li\u003e\n\u003cli\u003eIndustrial PA12-CF displays outstanding properties even after moisture conditioning or saturation compare to PA6-CF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials\/Spool\/Packaging Information: \u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic spool and packaging\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum sealed bag with an additional re-usable mylar bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm (+\/- 0.05mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1KG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e:  1.15g\/cm3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEmpty Plastic Spool: \u003c\/strong\u003e~140g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003ePrinting Settings\u003c\/h3\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/store.dremc.com.au\/search?sort_by=relevance\u0026amp;q=harden+steel\u0026amp;type=product\u0026amp;options%5Bprefix%5D=last\u0026amp;options%5Bunavailable_products%5D=last\u0026amp;filter.v.price.gte=\u0026amp;filter.v.price.lte=\u0026amp;filter.p.product_type=Nozzle\" title=\"DREMC Hardened Steel Nozzles\" target=\"_blank\"\u003e\u003cspan\u003ewear resistant \u003c\/span\u003enozzle\u003c\/a\u003e must be used, carbon fiber material is abrasive and will wear standard brass nozzles and \u0026gt;0.5mm nozzle is recommended.\u003c\/p\u003e\n\u003cp\u003eFor best results, dry filament using a filament drier before use or print from dryer running or dry box. Keep in an airtight container or included mylar bag for medium\/long term storage with silica desiccant. [If you hear popping or inconsistent extrusion while purging filament, suggest drying before printing for best results] \u003ca href=\"https:\/\/support.dremc.com.au\/support\/solutions\/articles\/51000292935-filament-drying-time-recommendation\" title=\"3D Printing Drying Guide\"\u003eFilament Drying Guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint Profile Example: \u003c\/span\u003e\u003ca title=\"DREMC Filament 3D Printing Profile\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000343310-dremc-filament-3d-printing-profile\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAvoid printing from AMS for better reliability, print from dry box or dryer, see above printing specific tips. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBrittle Materials Guide: \u003ca rel=\"noopener\" title=\"Print Tip: Brittle Materials (Carbon Fibre\/Glass Fibre\/Sparkle\/Glow in Dark)\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000492353-print-tip-brittle-materials-carbon-fibre-glass-fibre-sparkle-glow-in-dark-\" target=\"_blank\"\u003ehttps:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000492353-print-tip-brittle-materials-carbon-fibre-glass-fibre-sparkle-glow-in-dark-\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-sm\" style=\"font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eNozzle Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e270°C - 300°C (~290\u003cspan\u003e°C\u003c\/span\u003e \u0026amp; Low part cooling is recommended for strength parts)*\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Plate Temperature\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e80°C - 100°C\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Material\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eWorks well with most common build surfaces. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/pei-build-plate\" target=\"_blank\"\u003ePEI Build Plate\u003c\/a\u003e (Texture suitable), smooth PEI with PVA\/Bed Adhesive such as \u003ca href=\"https:\/\/store.dremc.com.au\/products\/magigoo-pa-3d-printing-adhesive-for-polyamide-nylon-50ml\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e. \u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eBuild Surface Treatment\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eTypically none required. Some surfaces such as glass work best with PVA glue stick or \u003ca href=\"https:\/\/store.dremc.com.au\/collections\/magigoo\" title=\"Magigoo Bed Adhesive\"\u003eMagigoo\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eCooling Fan\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eLOW-MEDIUM for better surface quality\u003cbr\u003eOFF-LOW (\u0026lt;10%) for better strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eEnclosure \/ Heater Chambers\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e\n\u003cp\u003eRecommended for complex larger geometries. \u003cbr\u003e50-90˚C+ may be required for higher density and larger geometries.\u003c\/p\u003e\n\u003cp\u003eRecommend VOC\/Air Filtering or print in well ventilated room\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e30 mm\/s - 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eRetraction\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eThe ideal retraction settings vary from printer to printer. If you find the retraction settings are causing gaps in your part, the following settings may help.\u003cbr\u003eDirect Drive: Retraction distance of 0.5 - 1mm with retraction speed of 20mm\/s\u003cbr\u003eBowden: Retraction distance of 2 - 3mm with retraction speed of 20 - 40mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eDrying Recommendation \u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003e~70\u003cspan class=\"fr-view collab-annotatable\" data-test-id=\"article-description\" id=\"article_description\"\u003e°\u003c\/span\u003ec for 8-12hr (Only dry if filament is wet, over drying\/repeat drying can damage filament)\u003ca href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000342355-dremc-filament-snap-on-addon\"\u003e REQUIRE PRINTED CLAMP WHEN DRYING\u003c\/a\u003e (\u003ca title=\"Filament Drying Guide\" href=\"https:\/\/support.dremc.com.au\/en\/support\/solutions\/articles\/51000292935-filament-drying-time-recommendation\"\u003eFilament Dryer Guide\u003c\/a\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width: 206px;\"\u003eStorage\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eKeeping filament in an airtight container or provided Mylar bag with new\/dried \u003cspan\u003e\u003ca href=\"https:\/\/store.dremc.com.au\/products\/filament-drying-desiccant\" title=\"Slice Engineering Filament Drying Desiccant\"\u003edesiccant\u003c\/a\u003e. \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 206px;\" scope=\"row\"\u003e\u003cspan\u003eSupport Material\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd style=\"width: 693px;\"\u003eSingle Extrusion:\u003cbr\u003eSelf Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Due to the low co-efficient of friction please ensure you have smooth filament path from filament box\/dryer. We recommended \u003ca href=\"https:\/\/store.dremc.com.au\/products\/3m-ptfe-reverse-bowden-tubing-3mm-x-4mm?_pos=5\u0026amp;_sid=2b9f61407\u0026amp;_ss=r\" title=\"PTFE 3x4mm\"\u003e3x4mm PTFE\u003c\/a\u003e to be used for reverse bowden.  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBased on 0.5\/0.6 mm nozzle. Printing conditions may vary with different printers and nozzle diameters.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* As always you should do temperature to tower as each machine printing temperature may vary depending on hotend\/printing speed etc. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpool Size:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpool Diameter: 200mm (+\/-1mm)\u003c\/li\u003e\n\u003cli\u003eSpool Hub Diameter: 53mm (+\/-1mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpool Width: 66mm (+\/-1mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRe-Order Number. 81610665\u003c\/p\u003e","brand":"DREMC","offers":[{"title":"Black","offer_id":44808981610665,"sku":"DR-PA12-CF","price":105.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/dremc-pa12-cf-filament-175mm-1kg-dr-pa12-cf-7054891.png?v=1755907308"},{"product_id":"polymaker-fiberon-pa6-gf25-formerly-polymide-pa6-gf","title":"Polymaker Fiberon™ PA6-GF25 500g 1.75mm (Formerly PolyMide™ PA6-GF)","description":"\u003cdiv id=\"rvdsfProductDetailOverviewPanel\" class=\"panel-collapse collapse in\" aria-expanded=\"true\" data-parent=\"#rvdsfProductDetailDescriptionContent\"\u003e\n\u003cdiv class=\"card-body panel-body\"\u003e\n\u003cp\u003eIndustrial glass-fiber reinforced Nylon 6 delivers high stiffness and impact strength for a wide range of high performance applications requiring stiffness and durability such as lab equipment, brackets, jigs and fixtures.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-fiber reinforced Nylon 6 combines excellent mechanical performance with high stiffness \u0026amp; heat resistance.\u003c\/li\u003e\n\u003cli\u003eReinforced with 25% chopped fibers delivering excellent tensile layer-adhesion, stiffness and high strength to weight ratio.\u003c\/li\u003e\n\u003cli\u003eExcellent strength, stiffness and impact strength in \"dry state\".\u003c\/li\u003e\n\u003cli\u003eHigh heat resistance up to 191℃ HDT (0.45 MPa) after annealing.\u003c\/li\u003e\n\u003cli\u003eCost-effective price to performance ratio.\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability during printing.\u003c\/li\u003e\n\u003cli\u003eCardboard spool \u0026amp; packaging (made from 100% recycled cardboard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"lead\"\u003ePolyMide PA6-GF has transitioned to Polymakers Fiberon range and is now sold as Fiberon PA6-GF25 (same product, new name and packaging)\u003c\/p\u003e\n\u003cp\u003eFiberon™ is polymakers family of fiber-reinforced composite filaments developed to provide outstanding mechanical performance for a range of engineering applications.\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA6-GF25 is an industrial glass fiber reinforced PA6 (Nylon 6) filament featuring 25% chopped glass fibers by weight. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion like with many other glass-fiber reinforced filaments. This is achieved through Polymakers Fiber-Adhesion™ technology which optimizes the surface chemistry of the fibers to achieve better dispersion and bonding to the Nylon 6 matrix and delivers an outstanding filament for functional applications. Fiberon™ PA6-GF25 offers an excellent cost-to-performance ratio for many end-use and functional applications.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhy choose PA6-GF25\u003c\/h3\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-10\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Stiffness \u0026amp; Strength - \u003c\/strong\u003eFeaturing a tensile modulus up to 5.3 GPA on the XY axis and 3.3 GPA on the Z axis, Fiberon™ PA6-GF25 combines excellent stiffness and toughness to deliver a versatile and high performance filament for a wide variety of high performance and dry\u003cspan style=\"font-size: 10.8333px;\"\u003e \u003c\/span\u003eindustrial or engineering applications\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Heat Resistance - \u003c\/strong\u003eFeaturing a heat deflection temperature of up to 191°C after annealing\u003csup id=\"cite_ref-1\"\u003e[2]\u003c\/sup\u003e, Fiberon™ PA6-GF25 can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutstanding Layer Adhesion -\u003c\/strong\u003e Most fiber reinforced materials show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Fiber-Adhesion™ technology not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarp-Free™ -\u003c\/strong\u003e Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The Warp-Free™ technology is designed to work best with minimal bed temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear Resistant and Tough - \u003c\/strong\u003eParts printed in Fiberon™ PA6-GF25 display excellent strength and wear resistant properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Printability – \u003c\/strong\u003eUnlike many other Nylon filaments, Fiberon™ PA6-GF25 is extremely easy to work with, exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncompromised Quality - \u003c\/strong\u003ePolymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-10\"\u003e\n\u003cdiv class=\"col-sm-1\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e \u003cem\u003eMost Nylon parts in the real world undergo a process called \"Moisture conditioning\" which improves toughness and flexibility of the Nylon while reducing tensile strength and stiffness. Unless protected with a moisture barrier, PA6-GF shows a greater change in mechanical properties when subjected to water \/ high humidity in comparison to long-chain nylon filaments like PA12-CF or PA612-CF. In simple terms PA6-GF will typically offer the best properties in a dry application, but for a wet or high humidity application a longer chain nylon such as PA612 or PA12 may be better. \u003c\/em\u003e\u003cbr\u003e\u003csup\u003e[2]\u003c\/sup\u003e Fiberon™ PA6-GF25\u003cem\u003e displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. \u003c\/em\u003eFiberon™ PA6-GF25\u003cem\u003e can be annealed in the oven at 100˚C for 16 hours right after the printing process.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":45743828238505,"sku":"FG02001","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/polymaker-fiberon-pa6-gf25-500g-175mm-formerly-polymide-pa6-gf-fg02001-3646742.png?v=1755906836"},{"product_id":"polymaker-fiberon-pa612-esd-500g-1-75mm","title":"Polymaker Fiberon™ PA612-ESD 500g 1.75mm","description":"\u003cp\u003eFiberon™ PA612-ESD merges nylon's strength and thermal stability with static-dissipative features, enabling the production of ESD-safe components such as housings, jigs, and fixtures essential for the aerospace\/electronics sector.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced with CNT for ESD-safety, surface resistivity of 10⁴–10⁷ Ω\/sq\u003c\/li\u003e\n\u003cli\u003eHigh heat resistance up to 157°C HDT (0.45 MPa) after annealing.\u003c\/li\u003e\n\u003cli\u003eReinforced with 10% chopped fibers for high stiffness and dimensional accuracy.\u003c\/li\u003e\n\u003cli\u003ePA612 Nylon base delivers reduced moisture sensitivity to maintain outstanding mechanical performance wet or dry.\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability during printing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhy choose PA612-ESD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWith a surface resistivity of 10⁴–10⁷ Ω\/sq, Fiberon PA612-ESD protects sensitive components from static discharge—ideal for PCBs, enclosures, and cleanroom tools.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReinforced with CNT and 10% carbon fiber, this filament delivers high stiffness, 84 MPa XY tensile strength, and consistent dimensional accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintain mechanical integrity in high-temperature environments with a heat deflection temperature of up to 157 °C at 0.45 MPa.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrints fast—up to 300 mm\/s—with low warping and excellent surface finish. Supports self-supporting structures and stays stable across long jobs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEach spool is vacuum-sealed, tangle-free, and AMS - compatible—so your prints stay smooth and your workflow uninterrupted.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint Settings:\u003c\/h3\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBed Temperature: 40˚C - 50˚C\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eFan: OFF\u003c\/p\u003e\n\u003cp\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1-3mm\u003cbr\u003eRetraction Speed: 20-40mm\/s\u003c\/p\u003e\n\u003cp\u003eDrying Settings: 100˚C for 10h\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003cp\u003eFor even better performance, you can anneal this material for 16 hours @ 100°C.\u003c\/p\u003e\n\u003cp\u003ePrinting Requirements\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":46500222927017,"sku":"FG08001","price":95.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/polymaker-fiberon-pa612-esd-500g-175mm-fg08001-4608838.png?v=1761219068"},{"product_id":"polymaker-fiberon-pps-gf20-grey-500g-1-75-mm","title":"Polymaker Fiberon™ PPS-GF20 Grey 500g 1.75 mm","description":"\u003cp\u003ePolymaker's Fiberon™ PPS-GF20 combines polyphenylene sulfide with 20% glass fibre reinforcement to deliver exceptional thermal stability, dimensional accuracy, and electrical insulation properties. Engineered for demanding applications in electronics, aerospace, and industrial sectors, this 500g spool of 1.75mm filament meets the rigorous requirements of professionals seeking superior performance and reliability in their 3D-printed components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh performance PPS-GF with 20% glass fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003eElectrical insulation perfect for electronic housings and ADAS sensor enclosures.\u003c\/li\u003e\n\u003cli\u003eFlame retardant (UL94 V0) and exceptional chemical resistance\u003c\/li\u003e\n\u003cli\u003eExtreme heat resistance up to 236°C HDT after annealing.\u003c\/li\u003e\n\u003cli\u003eHigh bending modulus and tensile strength.\u003c\/li\u003e\n\u003cli\u003eLow moisture sensitivity for humidity or wet applications.\u003c\/li\u003e\n\u003cli\u003eReliable and consistent tolerance (\u003cstrong\u003e1.75mm diameter\u003c\/strong\u003e +\/- 0.03mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"text-align: center;\"\u003eWhy choose \u003cspan class=\"rvdsf-label-name\"\u003ePPS-GF20\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiberon PPS-GF20 offers 6.05 kV\/mm dielectric strength and a low dielectric constant (2.71 @ 1MHz), making it perfect for electrical housings, ADAS sensor enclosures, and structural components in 5G base stations.\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain structural integrity in temperatures up to 236.3 °C (HDT @ 0.45 MPa after annealing). Whether you're building parts for high-temp enclosures, hot-air equipment, or vehicle under-hood use, this filament won’t warp under pressure.\u003c\/li\u003e\n\u003cli\u003eWith 20% glass fiber reinforcement, PPS-GF20 delivers exceptional strength and stiffness—up to 4552 MPa Young’s modulus and 102 MPa bending strength in XY—ideal for brackets, antenna mounts, and chemically exposed parts.\u003c\/li\u003e\n\u003cli\u003eUL94 V0 certified at 1.5mm and resistant to acids, bases, oils, and solvents. A trusted option for mission-critical environments such as chemical labs, factory floors, and automotive housings.\u003c\/li\u003e\n\u003cli\u003eSupports high-speed printing (up to 250 mm\/s) with minimal warping and stable Z-axis strength. Recommended for hardened steel nozzles. Available in neutral gray for reduced heat absorption and post-processing flexibility.\u003c\/li\u003e\n\u003cli\u003eDelivered vacuum-sealed and neatly wound, this filament is compatible with Bambu AMS systems. Low moisture absorption (0.11%， 70%RH, 23°C) ensures reliable print quality, even in humid environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":46500249895081,"sku":"FM02001","price":119.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/polymaker-fiberon-pps-gf20-grey-500g-175-mm-fm02001-9701614.png?v=1761219145"},{"product_id":"polymaker-fiberon™-pa6-cf20-formerly-polymide™-pa6-cf","title":"Polymaker Fiberon™ PA6-CF20 (Formerly PolyMide™ PA6-CF)","description":"\u003cp\u003e\u003cstrong\u003ePolymaker Fiberon™ PA6-CF20\u003c\/strong\u003e sets new standards in terms of strength and durability. Reinforced with 20% carbon fibre, it brings outstanding stiffness, stability and heat resistance to your 3D printing projects. Fiber Adhesion™ technology ensures excellent layer adhesion and makes \u003cem\u003ePA6-CF20\u003c\/em\u003e the perfect choice for applications that require maximum durability.\u003c\/p\u003e\n\u003cp\u003eThanks to heat resistance of up to 215 °C and extreme durability, PA6-CF20 outperforms almost any other printing material. It is ideal for functional components that are subject to heavy use.\u003c\/p\u003e\n\u003ch3\u003eOutstanding Performance Features\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExceptional Strength \u0026amp; Stiffness\u003c\/strong\u003e: Tensile strength up to 109 MPa and Youngs modulus over 8.6 GPa (XY), providing robust, rigid parts.\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Heat Resistance\u003c\/strong\u003e: Withstands temperatures up to 215°C after annealing\u003csup id=\"cite_ref-1\"\u003e[2]\u003c\/sup\u003e, suitable for parts exposed to high thermal loads.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Layer Adhesion\u003c\/strong\u003e: Fiber Adhesion™ technology ensures strong interlayer bonding and cohesive, durable prints.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional Stability\u003c\/strong\u003e: Minimal warping and excellent size stability, even on large or complex prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e: Suitable for use in chemically aggressive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Printability – \u003c\/strong\u003eUnlike many other Nylon filaments, Fiberon™ PA6-CF20 is extremely easy to work with, exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to Print for Advanced Users\u003c\/strong\u003e\u003cbr\u003eWhile engineered for high performance, Fiberon™ PA6-CF20 is optimized for reliable printing on advanced FDM\/FFF 3D printers equipped with an all-metal hotend and a hardened nozzle due to the abrasive carbon fiber content. Filament drying and post-print annealing are recommended for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSame Trusted Formula, New Name\u003c\/strong\u003e\u003cbr\u003eFiberon™ PA6-CF20 is the same proven formula as PolyMide™ PA6-CF, though it may print in a slightly darker black shade than its predecessor.\u003c\/p\u003e\n\u003cp\u003eChoose Fiberon™ PA6-CF20 for parts that demand maximum strength, heat resistance, and durability in industrial and engineering environments.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA6-CF20 is the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csup id=\"cite_ref-1\"\u003e[1]\u003c\/sup\u003e \u003cem\u003eMost Nylon parts in the real world undergo a process called \"Moisture conditioning\" which improves toughness and flexibility of the Nylon while reducing tensile strength and stiffness. Unless protected with a moisture barrier, PA6-CF shows a greater change in mechanical properties when subjected to water \/ high humidity in comparison to long-chain nylon filaments like PA12-CF or PA612-CF. In simple terms PA6-CF will typically offer the best properties in a dry application, but for a wet or high humidity application a longer chain nylon such as PA612 or PA12 may be better. \u003c\/em\u003e\u003cbr\u003e\u003csup\u003e[2]\u003c\/sup\u003e Fiberon™ PA6-CF20\u003cem\u003e displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallisation during the printing process, an additional step is required: Annealing. \u003c\/em\u003eFiberon™ PA6-CF20\u003cem\u003e can be annealed in the oven at 100˚C for 16 hours right after the printing process.\u003c\/em\u003e\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":46551822532777,"sku":"FG03001","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0541\/6638\/8905\/files\/polymaker-fiberon-pa6-cf20-formerly-polymide-pa6-cf-fg03001-1867418.png?v=1762410204"}],"url":"https:\/\/store.dremc.com.au\/collections\/pa-nylon-filament.oembed","provider":"DREMC STORE 3D Printing Supplies","version":"1.0","type":"link"}